VESTAMID® NRG 2901 black
PA12 & 德国赢创
VESTAMID® L LX9009
PA12 & 德国赢创
牌号信息 |
PA12 & 德国赢创 指导价格:暂无 塑料库存: 缺货 |
PA12 & 德国赢创 指导价格:暂无 塑料库存: 缺货 |
|
牌号简介 |
对于燃气管道配件,Vestamid® NRG 2901是一种高分子热稳定化合物,具有特殊的脱模性能。此外,Vestamid® NRG 2901还具有成核作用,以减少成型件的循环时间和收缩。通常,基于PA 12的化合物的机械性能随湿度的变化变化变化很小,因为它们的吸湿性很低。这种半晶材料制成的零件具有特殊的冲击强度、高耐磨性、低摩擦性和良好的耐化学性。我们建议在注射成型过程中,加工温度在230°C(446°F)到260°C(500°F)-在某些情况下高达280°C(536°F)。模具温度应在60°C(140°F)到100°C(212°F)的范围内。建议在加工前在80°C(176°F)下干燥2小时至4小时。聚酰胺12是一种高性能热塑性聚合物,具有更高的性能特性,可在已安装管道的整个使用寿命内安全运行。在许多苛刻的应用领域,包括乘用车中的燃油管路、卡车中的空气制动管和离岸应用领域,它拥有相当多的安全和成熟的经验。 For gas pipe fittings VESTAMID® NRG 2901 is a high molecular, heat stabilized compound with exceptional mold release properties. Additionally, VESTAMID® NRG 2901 is nucleated to reduce the cycle time and shrinkage of molded parts. Generally mechanical properties of compounds based on PA 12 vary little with changing humidity due to their low-moisture absorption. Parts made of this semi-crystalline material are characterized by exceptional impact strength, high abrasion resistance, low friction and good chemical resistance. Polyamide 12 is a high performance thermoplastic polymer with increased performance characteristics that translates into safe operations over the life of the installed pipeline. It has a considerable record of safe and proven experience in many demanding applications, including fuel lines in passenger cars, air brake tubing in trucks and off-shore applications. |
未填充的Vestamid聚酰胺12化合物表征:中等粘度,光稳定应用:滑雪覆盖膜一般来说,可以说长链、半结晶的聚酰胺吸收很少的水,耐极性和非极性溶剂,具有低的蠕变行为和高的抗冲击性,可在较宽的温度下使用。距离范围。在这个价格范围内,几乎没有其他聚合物材料表现出这些特性。 Unfilled VESTAMID® polyamide 12 compounds Characterization: medium viscosity, light stabilized Applications: ski cover films In general, it can be said that long-chain, semi-crystalline polyamides absorb little water, are resistant to polar and non-polar solvents, exhibit low creep behavior and high impact resistance and can be used in a wide temperature range. Virtually no other polymer material in this price range exhibits these properties. |
|
产品描述 | |||
厂家: | 德国赢创 Evonik | 德国赢创 Evonik | |
类别: | PA12 PA12 | PA12 PA12 | |
填料: | |||
用途: | 薄膜 | ||
性能特点: | 冲击性能好,低摩擦系数,含脱模剂,半结晶,高分子量,耐磨,耐化学性,低吸湿性,热稳定性好 High impact resistance,Low coefficient of friction,Good stripping performance,Hypocrystalline,High molecular weight,Good wear resistance,Solvent resistance,Low moisture absorption,Heat Stabilized | 耐候抗UV,易加工,冲击性能好,吸水率低,减震,低摩擦系数,食品接触,半结晶,耐疲劳性好,耐磨,耐油,耐化学性,耐低温冲击,热稳定性好,抗应力开裂,耐燃油 Weather resistance is good,Excellent Processability,High impact resistance,Low or no water absorption,noise reduction,Low coefficient of friction,Food contact compliance,Hypocrystalline,Fatigue resistance,Good wear resistance,Grease resistance,Solvent resistance,low-temperature impact resistance,Heat Stabilized,High ESCR,Fuel resistance | |
加工条件: | 注射成型 Injection Molding | 挤出 Extrusion |
备注 |
1 一般属性:这些不能被视为规格。
|
2、2nd heating
|
价格走势对比图
PA12 VESTAMID® NRG 2901 black
PA12 VESTAMID® L LX9009
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交