FEP，3M™ Dyneon™ Fluoroplastic FEP 6338Z对比FEP，Teflon® FEP 9475物性表,价格行情_搜料

牌号信息	3M™ Dyneon™ Fluoroplastic FEP 6338Z 物性表 FEP & 美国3M 指导价格：暂无塑料库存：缺货	Teflon® FEP 9475 物性表 FEP & 美国科慕指导价格：暂无塑料库存：缺货
牌号简介	3M™ Dyneon™ Fluoroplastic FEP 6338Z是一种由四氟乙烯和六氟丙烯组成的全氟化共聚物，属于FEP类产品。它是专为超高速挤压电线绝缘和功能大大提高的弯曲寿命性能。特殊特性超高速挤压增强弹性寿命优良的介电性能宽加工窗口符合VDE 0207极低可燃性（高LOI）高热稳定性低摩擦系数极高风化和紫外线稳定性 3M™ Dyneon™ Fluoroplastic FEP 6338Z is a fully fluorinated copolymer comprising tetrafluoroethylene and hexafluoropropylene and is belonging to the product class FEP. It was designed for ultra high speed extrusion for wire insulation and features greatly enhanced flex life properties. Special Features Ultra high extrusion speed Enhanced flex life Excellent dielectric properties Wide processing window Complies with VDE 0207 Extremely low flammability (high LOI) High thermal stability Low coefficient of friction Very high weathering and UV stability	杜邦Teflon® FEP 9475的典型应用包括小直径、薄壁电线和电缆绝缘、工业薄膜以及通过注射成型制成的复杂或薄壁零件。说明杜邦Teflon® FEP 9475是一种可熔融加工的氟塑料树脂，以颗粒形式提供。它是四氟乙烯和六氟丙烯的共聚物，不含添加剂，符合ASTM D 2116 II型的要求。特氟隆FEP9475具有较高的熔体流动速率和优良的电性能，特别设计用于高速挤压双绞线结构的小尺寸电线上的薄涂层。该树脂具有低压应用所需的电气和机械性能。此外，特氟隆FEP9475比其他大多数氟塑料树脂具有更高的熔体流动速率。这允许更高的挤压速度和更容易的加工，使特氟隆FEP 9475成为生产薄壁挤压件的经济有效的替代品。特氟隆FEP9475的设计和制造是为了提高高频下的耗散系数，并在熔融挤出过程中具有显著的板外阻力。在氮气注入过程中，当与适当的核素一起使用时，它适用于固体绝缘体和泡沫绝缘体。当生产具有氟塑料树脂优良性能的产品需要传统的挤压和成型工艺时，使用特氟隆FEP 9475。与其他热塑性塑料相比，特氟隆FEP9475具有较高的熔融强度和热稳定性，可以提高加工速度。与其他氟塑料相比，耐高温蠕变性能提供了优越的平衡性和最终使用性能。Teflon FEP 9475结合了传统热塑性塑料的易加工性，具有许多类似于聚四氟乙烯的特性。由纯聚四氟乙烯FEP 9475树脂制成的经过适当加工的产品具有氟塑料树脂的优良特性：化学惰性、优异的介电性能、耐热性、韧性和柔韧性、低摩擦系数、不粘特性、可忽略的吸湿性、低可燃性、性能。在极端温度下，具有优异的耐候性。在火焰情况下，特氟隆FEP9475的产品不着火，不促进火焰蔓延。当被其他来源的火焰点燃时，它们的热量贡献很小，并且以很低的烟以缓慢的速度添加。 Typical Application Applications for DuPont™ Teflon® FEP 9475 include small diameter, thin wall wire and cable insulation; industrial film; and intricate or thin wall parts made by injection moulding. Description DuPont™ Teflon® FEP 9475 is a melt-processible fluoroplastic resin available in pellet form. It is a copolymer of tetrafluoroethylene and hexafluoropropylene, without additives, that meets the requirements of ASTM D 2116 type II. With a relatively high melt flow rate and excellent electrical properties, Teflon ® FEP 9475 has been specifically designed for high-speed extrusion of thin coatings on small-gauge wires for twisted-pair constructions. This resin provides the electrical and mechanical properties needed for low voltage applications. In addition, Teflon ® FEP 9475 has a higher melt flow rate than most other fluoroplastic resins. This permits higher extrusion speeds and easier processing, making Teflon ® FEP 9475 a cost-effective alternative for producing thin-wall extrusions. Teflon ® FEP 9475 is designed and made to have improved dissipation factor at high frequencies, and to have significant plate-out resistance in melt extrusion. It is suitable as a solid insulator, and as a foamed insulator when used with an appropriate nucleant in a nitrogen gas injection process. Teflon ® FEP 9475 is used when traditional extrusion and molding processes are required for producing products with the superior properties of a fluoroplastic resin. Compared to other thermoplastics, the high melt strength and thermal stability of Teflon ® FEP 9475 can be used to improve processing rates. Compared with other fluoroplastics, creep resistance at high service temperatures provides a superior balance and level of end-use properties. Teflon ® FEP 9475 combines the processing ease of conventional thermoplastics with many properties similar to those of polytetrafluoroethylene. Properly processed products made from neat Teflon ® FEP 9475 resin provide the superior properties characteristic of fluoroplastic resins: chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes, and excellent weather resistance. In a flame situation, products of Teflon ® FEP 9475 resist ignition and do not promote flame spread. When ignited by flame from other sources, their contribution of heat is very small and added at a slow rate with very little smoke.

产品描述
厂家：	美国3M	美国科慕 Chemours
类别：	FEP FEP	FEP FEP
填料：
用途：	绝缘材料,电线电缆应用	薄壁绝缘,薄壁部件,电线电缆应用,薄膜,低压绝缘
性能特点：	耐候抗UV,流动性高,低摩擦系数,共聚物,热稳定性好,抗应力开裂 Weather resistance is good,High liquidity,Low coefficient of friction,Copolymer,Heat Stabilized,High ESCR	耐候抗UV,无粘性,韧性好,电气性好,易流动,耐高温,耐化学性,热稳定性好,防火阻燃等级V-0 Weather resistance is good,No viscosity,Good flexibility,Good Electrical Properties,Good liquidity,High Heat Resistance,Solvent resistance,Heat Stabilized,V-0
加工条件：	挤出 Extrusion	压缩模塑

技术参数

物理性能
PHYSICAL 3M™ Dyneon™ Fluoroplastic FEP 6338Z Teflon® FEP 9475 单位
UNIT 测试方法
TEST METHOD

吸水率(24hr)
Water absorption rate % ASTM D570

密度
Density g/cm³ ASTM D792

密度
Density g/cm³ ISO 1183

密度
Density g/cm³ ISO 12086

熔体质量流动速率(372℃，5.0kg)
Melt Flow Rate g/10min ASTM D2116

熔体质量流动速率(372℃，5.0kg)
Melt Flow Rate g/10min ISO 1133

熔体质量流动速率(372℃，5.0kg)
Melt Flow Rate g/10min ISO 12086

机械性能
MECHANICAL 3M™ Dyneon™ Fluoroplastic FEP 6338Z Teflon® FEP 9475 单位
UNIT 测试方法
TEST METHOD

弯曲模量(23℃)
Bending modulus MPa ASTM D790

弯曲模量(23℃)
Bending modulus MPa ISO 178

拉伸应变(断裂，23℃)
Tensile strain % ASTM D638

拉伸应变(断裂，23℃)
Tensile strain % ISO 12086

拉伸应变(断裂，23℃)
Tensile strain % ISO 527-2

拉伸强度(屈服，23℃)
tensile strength MPa ASTM D638

拉伸强度(屈服，23℃)
tensile strength MPa ISO 12086

拉伸强度(断裂，23℃)
tensile strength MPa ISO 527-2

拉伸模量
Tensile modulus MPa ISO 527-2

邵氏硬度(邵氏 D)
Shore hardness ASTM D2240

邵氏硬度(邵氏 D)
Shore hardness ISO 868

热性能
THERMAL 3M™ Dyneon™ Fluoroplastic FEP 6338Z Teflon® FEP 9475 单位
UNIT 测试方法
TEST METHOD

熔融温度
Melting temperature ℃ ASTM D4591

熔融温度
Melting temperature ℃ ISO 12086

电气性能
ELECTRICAL 3M™ Dyneon™ Fluoroplastic FEP 6338Z Teflon® FEP 9475 单位
UNIT 测试方法
TEST METHOD

介电常数(1 MHz)
Dielectric constant ASTM D150

介电常数(1.00 GHz)
Dielectric constant ASTM D2520

介电常数(23 ℃，1 MHz)
Dielectric constant ASTM D150

介电常数(23 ℃，9.40 GHz)
Dielectric constant ASTM D150

介电强度(0.25 mm)
Dielectric strength kV/mm ASTM D149

介电强度(0.25 mm)
Dielectric strength kV/mm IEC 60243-1

相对电容率(1 MHz)
Relative permittivity IEC 60250

相对电容率(1.00 GHz)
Relative permittivity IEC 60250

耗散因数(1 GHz)
Dissipation factor ASTM D2520

耗散因数(1 GHz)
Dissipation factor IEC 60250

耗散因数(1 MHz)
Dissipation factor ASTM D150

耗散因数(1 MHz)
Dissipation factor IEC 60250

耗散因数(9.4 GHz)
Dissipation factor ASTM D150

阻燃性能
FLAMMABILITY 3M™ Dyneon™ Fluoroplastic FEP 6338Z Teflon® FEP 9475 单位
UNIT 测试方法
TEST METHOD

极限氧指数
Extreme oxygen index % ASTM D2863

极限氧指数
Extreme oxygen index % ISO 4589-2

阻燃等级
Flame retardant level UL 94

补充信息
3M™ Dyneon™ Fluoroplastic FEP 6338Z Teflon® FEP 9475 单位
UNIT 测试方法
TEST METHOD

Critical Shear Rate(372℃)
Critical Shear Rate（372℃） sec^-1 Internal Method

MIT耐折强度(8 mil film，200.0 µm)
MIT flexural strength (8 mil film, 200.0 µ m) Cycles ASTM D2176

MIT耐折强度(double folds，200.0 µm)
MIT flexural strength (double folds, 200.0 µ m) ASTM D2176

加工方式

挤出 3M™ Dyneon™ Fluoroplastic FEP 6338Z Teflon® FEP 9475 单位测试方法

口模温度 °C

料筒1区温度 °C

料筒2区温度 °C

料筒3区温度 °C

料筒4区温度 °C

备注

1 一般属性：这些不能被视为规格。

2 方法A（短时间）

3 .25 mm film

4 Short Time, .25 mm film


相关资讯

牌号简介
产品描述
技术参数
物理性能
机械性能
热性能
电气性能
阻燃性能
补充信息
加工方式
挤出
备注
返回顶部

FEP，3M™ Dyneon™ Fluoroplastic FEP 6338Z对比FEP，Teflon® FEP 9475对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别