胶黏剂，FM® 209-1对比胶黏剂，FM® 309-1物性表,价格行情_搜料

牌号信息	FM® 209-1 物性表胶黏剂 & 美国氰特指导价格：暂无塑料库存：缺货	FM® 309-1 物性表胶黏剂 & 美国氰特指导价格：暂无塑料库存：缺货
牌号简介	FM® 209-1是一种新一代薄膜粘合剂，专门为金属和复合结构的高压釜外粘合而配制。这种新型粘合剂与高压釜固化相比，在真空条件下具有相似的性能，并且具有独特的韧性和剪切强度组合，最高可达121°C（250°F）。FM® 209-1设计用于在单片和夹层结构中粘合金属和复合基板。它与大多数121°C（250°F）和177°C（350°F）固化环氧基预浸料系统兼容，用于共固化、共粘合和二次粘合。FM® 209-1粘合膜在24°C（75°F）下的最低使用寿命为30天。FM® 209-1粘合剂对粘合前和粘合后的湿度暴露都有很好的抵抗力。FM® 209-1粘合剂以各种重量和厚度供应，作为无支撑膜或带有编织、针织或垫子载体的支撑膜。FM® 209-1薄膜粘合剂只能在真空压力下在71°C至177°C（160°F至350°F）的温度范围内固化。FM® 209-1的标准固化周期为121°C（250°F），在完全真空下90分钟，用于高压釜外（OOA）粘合应用，或在0.28 MPa（40 psi）压力下进行高压釜固化。建议的应用：金属和复合整体和夹层结构的高压釜外粘合，需要低温固化的应用，需要在低温下良好的使用性能。 FM® 209-1 is a next generation film adhesive specially formulated for out-of-autoclave bonding of both metallic and composite structures. This new adhesive provides similar performance in vacuum-only versus autoclave cure and has a unique combination of toughness and shear strength up to 121°C (250°F). FM 209-1 is designed for bonding metallic and composite substrates in monolithic and sandwich structures. It is compatible with most 121°C (250°F) and 177°C (350°F) curing epoxy-based prepreg systems for co-cure, co-bond and secondary bonding. FM 209-1 adhesive film provides minimum shop life of 30 days at 24°C (75°F). FM 209-1 adhesive has excellent resistance to both pre-bond and post- bond humidity exposures. FM 209-1 adhesive is supplied at various weights and thicknesses as an unsupported film or as a supported film with woven, knit or mat carrier. FM 209-1 film adhesive can be cured within the temperature range of 71°C to 177°C (160°F to 350°F) under vacuum-only pressure. The standard cure cycle for FM 209-1 is 121°C (250°F) for 90 minutes under full vacuum for out-of-autoclave (OOA) bonding applications or under 0.28 MPa (40 psi) pressure for autoclave cures. Suggested Applications: Out-of-autoclave bonding of metal and composite monolithic and sandwich structures Applications requiring low temperature cure Applications requiring good serviceability at low temperature	FM® 309-1一种用于粘合复合材料和金属结构的新一代粘合膜。这种新薄膜提供了高Tg[182°C（360°F）]、高韧性和高温剪切性能的独特组合。FM® 309-1设计用于共固化、共粘合或二次粘合应用，与大多数177°C（350°F）固化环氧基预浸料系统兼容。这种新薄膜具有优异的抗键合前和键合后湿度的性能，使用温度为177°C（350°F）。FM® 309-1粘合膜具有优异的操作性能（良好的粘性和悬垂性），在24°C（75°F）下的最低使用寿命为30天。FM® 309-1粘合剂可作为支撑物（编织玻璃、针织物或垫子载体）或无支撑膜以各种重量和厚度供应。对于共固化或共粘合应用，建议使用带有垫子载体的147-244 gsm（0.030-0.050 psf）的粘合膜重量。该胶膜适用于单片或夹层结构的胶接。使用FM® 309-1胶膜制造的蜂窝夹芯板具有优异的层压板质量（空隙率<1%）和很好的嵌缝性。FM® 309-1胶膜可在177°C（350°F）下在0.28 MPa（40 psi）下90分钟内固化，也可在真空压力下固化。真空固化后的性能与压力固化后的性能相当。建议应用：复合材料与金属结构的粘结共固化、共粘结和二次粘结应用 FM® 309-1 a next generation adhesive film for bonding composite and metallic structures. This new film provides a unique combination of high Tg [182°C (360°F)], high toughness and higher temperature shear properties. FM 309-1 is designed for co-cure, co-bond or secondary bonding applications and is compatible with most 177°C (350°F) curing epoxy-based prepreg systems. This new film has excellent resistance to pre-bond and post-bond humidity and has a service temperature of 177°C (350°F). FM 309-1 adhesive film provides excellent handling properties (good tack and drape) and has a minimum shop life of 30 days at 24°C (75°F). FM 309-1 adhesive can be supplied as a supported (woven glass, knit or mat carrier) or unsupported film at various weights and thicknesses. For co-cure or co-bond applications, adhesive film weight of 147 - 244 gsm (0.030 - 0.050 psf) with mat carrier is recommended. This adhesive film is suitable for bonding of monolithic or sandwich structures. Honeycomb sandwich panels manufactured using FM 309-1 adhesive film demonstrate excellent laminate quality (void content <1%) and very good filleting. FM 309-1 adhesive film can be cured at 177°C (350°F) in 90 minutes at 0.28 MPa (40 psi) or can also be cured under vacuum-only pressure. The performance after vacuum cure is comparable to that after pressure cure. Suggested Applications: Bonding of composite and metallic structures Co-cure, co-bond and secondary bonding applications

产品描述
厂家：	美国氰特 Cytec Industries	美国氰特 Cytec Industries
类别：	胶黏剂胶黏剂	胶黏剂胶黏剂
填料：
用途：	粘合,粘合剂	层压板,粘合,粘合剂
性能特点：	韧性好,粘结性好,防潮 Good flexibility,Good bond,Moisture resistance	韧性好,粘结性好 Good flexibility,Good bond
加工条件：