Nylene® 494 BLK
PA6 & 美国Custom Resins
Nylene® 494P IM
PA6 & 美国Custom Resins
牌号信息 |
PA6 & 美国Custom Resins 指导价格:暂无 塑料库存: 缺货 ![]() |
PA6 & 美国Custom Resins 指导价格:暂无 塑料库存: 缺货 ![]() |
![]() |
牌号简介 |
对于以小颗粒形式(如WLL)提供的20目粉末的旋转成型,所有定制树脂旋转成型级尼龙均干燥至小于0.15%的湿度,无需预干燥原始材料。我们强烈建议在模具中使用惰性气体,如氮气,以尽量减少尼龙的热降解。 Specially formulated nylon powder for the ROTOMOLDING process For uses where HIGH IMPACT properties are required Heat stabilized Dried to less than 0.20% moisture and packaged in foil-lined drums to eliminate the need for pre-drying Strongly recommend the use of an inert gas such as nitrogen in the mold to minimize thermal degradation during processing |
特殊配方的尼龙粉末,用于需要高冲击性能的旋转成型工艺,热稳定干燥至小于0.20%的湿度,并包装在衬箔桶中,以消除预干燥的需要。强烈建议在模具中使用惰性气体,如氮气,以最大限度地减少工艺过程中的热降解。辛辛 Specially formulated nylon powder for the ROTOMOLDING process For uses where HIGH IMPACT properties are required Heat stabilized Dried to less than 0.20% moisture and packaged in foil-lined drums to eliminate the need for pre-drying Strongly recommend the use of an inert gas such as nitrogen in the mold to minimize thermal degradation during processing |
|
产品描述 | |||
厂家: | 美国Custom Resins | 美国Custom Resins | |
类别: | PA6 PA6 | PA6 PA6 | |
填料: | |||
用途: | |||
性能特点: | 冲击性能好,热稳定性好 High impact resistance,Heat Stabilized | ||
加工条件: | 滚塑成型 | 滚塑成型 |
备注 |
1 一般属性:这些不能被视为规格。
|
价格走势对比图
PA6 Nylene® 494 BLK
PA6 Nylene® 494P IM
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交