ASA+ABS，Formaterm® ABS/ASA对比ASA+ABS，Prime ABS ST80物性表,价格行情_搜料

牌号信息	Formaterm® ABS/ASA 物性表 ASA+ABS & 美国Röchling 指导价格：暂无塑料库存：缺货	Prime ABS ST80 物性表 ASA+ABS & 美国Primex Plastics 指导价格：暂无塑料库存：缺货
牌号简介	产品特点良好的真空成型性能优异的耐候性极高的抗冲击强度和刚度产品应用真空成型工业卫生工程 Product characteristics Good vacuum forming properties Excellent weather resistance Very high impact strength and stiffness Product applications Vacuum forming industry Sanitary engineering	是热塑性弹性体和耐候ASA共同挤压在刚性ABS基板上的合金。Prime ABS ST80的设计旨在提供低光泽外观和柔软的手感，具有出色的耐用性，耐化学性和紫外线稳定性，以及改进的消音。应用：Prime ABS ST80特别适用于外部应用或将暴露于直接紫外线的内部零件，如仪表板、面板和装饰件。这包括海运、娱乐、汽车、重型卡车、农业和建筑设备。加工：Prime ABS ST80可在采用典型热成型ABS技术的传统设备上进行热成型。可使用外螺纹或内螺纹工具。Prime ABS ST80只能从基板侧加热。只要基板达到适合热成型的温度，软接触帽层也将足够热以形成热成型。软触帽层不应加热到325°F以上的温度。当板在300°F下的帽层温度下热成型时，软触帽层的最佳外观和性能已经获得。一般情况下，热成型ABS的最大建议加热速度为0.5-0.75秒/密耳。精加工：Prime ABS ST80可以用常规工具进行螺丝、钻孔、布线、冲压和模切。用Prime ABS ST80制造的零件可用机械螺钉、螺栓、螺母、铆钉和弹簧钢紧固件连接。螺纹切削或螺纹成型螺钉是固定单独接头的经济方法。如果不需要最大冲击强度，成形零件可与二氯甲烷连接。也可以使用冲压和快速焊接技术和声波焊接来连接Prime ABS ST80。请与Primex塑料公司代表联系，了解有关表面处理、制造或热成型工艺的更多信息。颜色、纹理和功能：Prime ABS ST80颜色可匹配，以满足您的特定要求。纹理包括小牛纹、HC、塞维利亚、Levant I和FL/HC。 Is an alloy of thermoplastic elastomers and weatherable ASA co-extruded over a rigid ABS substrate. Prime ABS ST80 is designed to provide a low gloss look and soft feel, which boasts excellent durability, chemical resistance and UV stability as well as improved sound dampening. Applications: Prime ABS ST80 is particularly suited for use in exterior applications or those interior parts that will be exposed to direct UV light such as dashboards, panels and trim. This includes marine, recreational, automotive, heavy truck, agricultural and construction equipment. Processing: Prime ABS ST80 can be thermoformed on conventional equipment employing techniques typical for thermoforming ABS. Male or female tools may be used. Prime ABS ST80 should be heated only from the substrate side. As long as the substrate reaches a temperature suitable for thermoforming, the soft touch cap layer will also be hot enough to thermoform. The soft touch cap layer should not be heated to a temperature above 325°F. The best appearance and performance of the soft touch cap layer has been obtained when the sheet is thermoformed with the temperature of the cap layer at 300°F. As a general rule, heating rates of 0.5-0.75 sec/mil are the maximum recommended for thermoforming ABS. Finishing: Prime ABS ST80 can be screwed, drilled, routed, punched and die-cut with conventional tooling. Parts made with Prime ABS ST80 may be joined with machine screws, bolts, nuts, rivets, and spring steel fasteners. Threadcutting or thread-forming screws are an economical means of securing separate joints. Formed parts may be joined with Methylene Chloride if maximum impact strength is not required. Press and snap techniques and sonic welding may also be used for the bonding of Prime ABS ST80. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: Prime ABS ST80 can be color matched to meet your specific requirements. Textures include Calf Grain, HC, Seville, Levant I, and FL/HC.

产品描述
厂家：	美国Röchling	美国Primex Plastics
类别：	ASA+ABS ASA+ABS	ASA+ABS ASA+ABS
填料：
用途：	卫浴产品	船舶应用,汽车外部零件,农业应用,体育用品,建筑应用领域,汽车仪表板
性能特点：	机械强度好,耐候抗UV,冲击性能好 Good Rigidity,Weather resistance is good,High impact resistance	耐候抗UV,冲击性能好,减震,可分散,耐高温,经久耐用,超声波焊接,耐化学性,柔软性好,可粘结性,低光泽 Weather resistance is good,High impact resistance,noise reduction,Machinable,High Heat Resistance,Durability,Ultrasonic soldering,Solvent resistance,Soft,Agglomerability,Low Gloss
加工条件：	真空成型	热成型 Thermo forming

技术参数

物理性能
PHYSICAL Formaterm® ABS/ASA Prime ABS ST80 单位
UNIT 测试方法
TEST METHOD

吸水率(平衡，23℃，50% RH)
Water absorption rate % ISO 62

密度
Density g/cm³ ASTM D792

密度
Density g/cm³ ISO 1183

熔体质量流动速率(230℃，3.80kg)
Melt Flow Rate g/10min ASTM D1238

冲击性能
IMPACT Formaterm® ABS/ASA Prime ABS ST80 单位
UNIT 测试方法
TEST METHOD

悬臂梁缺口冲击强度(23℃，3.2mm)
Impact strength of cantilever beam notch J/m ASTM D256

简支梁缺口冲击强度
Charpy Notched Impact Strength kJ/m² ISO 179

热性能
THERMAL Formaterm® ABS/ASA Prime ABS ST80 单位
UNIT 测试方法
TEST METHOD

使用温度(短期)
Operating temperature ℃

使用温度(长期)
Operating temperature ℃

导热系数
Thermal conductivity coefficient W/m/K DIN 52612

热变形温度(0.45 MPa，未退火，3.2 mm)
Hot deformation temperature ℃ ASTM D648

热变形温度(1.8 MPa，未退火，3.2 mm)
Hot deformation temperature ℃ ASTM D648

玻璃化转变温度
Glass transition temperature ℃ ISO 11357-2

线性热膨胀系数(MD)
Linear coefficient of thermal expansion 1/℃ ASTM D696

线性热膨胀系数(MD)
Linear coefficient of thermal expansion 1/℃ DIN 53752

维卡软化温度
Vicat Softening Temp ℃ ASTM D1525

维卡软化温度
Vicat Softening Temp ℃ ISO 306/B

电气性能
ELECTRICAL Formaterm® ABS/ASA Prime ABS ST80 单位
UNIT 测试方法
TEST METHOD

介电常数
Dielectric constant IEC 60250

介电强度
Dielectric strength kV/mm IEC 60243-1

体积电阻率
Volume resistivity ohms·cm IEC 60093

耗散因数(1 MHz)
Dissipation factor IEC 60250

表面电阻率
Surface resistivity ohms

表面电阻率
Surface resistivity ohms IEC 60093

阻燃性能
FLAMMABILITY Formaterm® ABS/ASA Prime ABS ST80 单位
UNIT 测试方法
TEST METHOD

3.00 mm
3.00 mm UL 94

机械性能
MECHANICAL Formaterm® ABS/ASA Prime ABS ST80 单位
UNIT 测试方法
TEST METHOD

弯曲模量(3.18 mm，50.80 mm跨距)
Bending modulus MPa ASTM D790

拉伸应变(屈服，3.18 mm)
Tensile strain % ASTM D638

拉伸应变(断裂)
Tensile strain % ISO 527-2

拉伸应变(断裂，3.18 mm)
Tensile strain % ASTM D638

拉伸强度(屈服)
tensile strength MPa ISO 527-2

拉伸强度(断裂，3.18 mm)
tensile strength MPa ASTM D638

拉伸模量
Tensile modulus MPa ISO 527-2

邵氏硬度(邵氏 D)
Shore hardness ASTM D2240

邵氏硬度(邵氏 D)
Shore hardness ISO 868

光学性能
OPTICAL Formaterm® ABS/ASA Prime ABS ST80 单位
UNIT 测试方法
TEST METHOD

光泽度(60°)
gloss ASTM D523

备注

1 一般属性：这些不能被视为规格。

2 0.050 in/min

3 Initial


相关资讯

牌号简介
产品描述
技术参数
物理性能
冲击性能
热性能
电气性能
阻燃性能
机械性能
光学性能
加工方式
备注
返回顶部

ASA+ABS，Formaterm® ABS/ASA对比ASA+ABS，Prime ABS ST80对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别