公司信息及水印
| 牌号简介 About |
|---|
| Kraton FG1901 G是一种透明的线性三嵌段共聚物,以苯乙烯和乙烯/丁烯为基础,聚苯乙烯含量为30%。它由北美提供,其物理形式如下所示。FG1901 GT-作为粉末颗粒提供,Kraton FG1901 G用作沥青和聚合物的改性剂。它也适用于制备用于鞋类应用的化合物,并且可用于制备粘合剂、密封剂和涂层。 Kraton FG1901 G is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. FG1901 GT - supplied as a dusted pellet Kraton FG1901 G is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings. |
| 技术参数 Technical Data | |||
|---|---|---|---|
|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
密度 Density |
0.910 | g/cm³ | ASTM D792 |
|
熔体质量流动速率 Melt Flow Rate |
|||
|
230℃,5.0kg 230℃,5.0kg |
14 到 28 | g/10min | ASTM D1238 |
|
马来酸酐含量 Maleic anhydride content |
|||
|
Bound Bound |
1.4 到 2.0 | wt% | 内部方法 |
|
含水量 water content |
注册或登录后
所有资料免费
|
ppm | 内部方法 |
|
溶液粘度 Solution viscosity |
注册或登录后
所有资料免费
|
||
|
25wt%甲苯,25℃ 25wt% toluene, 25 ℃ |
注册或登录后
所有资料免费
|
Pa·s | 内部方法 |
|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
邵氏硬度 Shore hardness |
注册或登录后
所有资料免费
|
||
|
邵氏 A,10 秒,模压成型 Shaw A, 10 seconds, molded |
注册或登录后
所有资料免费
|
ASTM D2240 | |
|
弹性体 Elastomer |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
拉伸强度 tensile strength |
注册或登录后
所有资料免费
|
||
|
断裂 fracture |
注册或登录后
所有资料免费
|
MPa | ASTM D412 |
|
拉伸应变 Tensile strain |
注册或登录后
所有资料免费
|
||
|
断裂 fracture |
注册或登录后
所有资料免费
|
% | ASTM D412 |
|
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
Styrene/Rubber ratio Styrene/Rubber ratio |
注册或登录后
所有资料免费
|
||
| 备注 |
|---|
| 1 一般属性:这些不能被视为规格。 |
|
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |














支付宝
微信支付