牌号简介 About |
---|
本数据表描述了TEKNILID TXPPE-2产品。该盖料由用于食品、医药和化妆品应用的热密封材料制成,要求与聚乙烯(PE)、环烯烃共聚物(COC)和聚丙烯(PP)具有可剥离键合。铝箔(铝箔)提供基本上零气体渗透,从而产生高氧气和MOI。真正的屏障保护您剥离这盖股票后暴露的产品,它是与定制和标准打印。聚酯/亮白色聚乙烯(w-pe)提供了良好的印刷背景。 This data sheet describes TEKNILID TXPPE-2 product This lid stock is made with a Heat Seal material for Food, Pharmaceutical, and Cosmetic applications requiring a peelable bond to polyethylene (PE), cyclic olefin copolymer (COC), and polypropylene (PP) The aluminum foil (AL foil) provides essentially zero gas permeation which renders high oxygen and moisture barrier protection You peel this lid stock back to expose the product It is available with custom and standard printing. The Polyester / bright white Polyethylene (W PE) offers an excellent printing background |
技术参数 Technical Data | |||
---|---|---|---|
薄膜 film |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
薄膜厚度 film thickness 2 |
93.2 | µm | |
密封强调 Sealing emphasis |
|||
-- -- 3 |
0.44 | N/mm | |
-- -- 4 |
0.63 | N/mm | |
-- -- 5 |
0.63 | N/mm | |
氧气传输速率 Oxygen transfer rate |
|||
23℃,100% RH 23℃,100% RH |
0.0 | cm³/m²/24 hr | |
水气透过率 Water vapor transmittance |
|||
38℃,90% RH 38℃,90% RH |
g/m²/24 hr | ||
用量 dosage |
m²/kg |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Thickness tolerance: ±10% |
3 To COC @ 350°F, 40psi, 0.5 sec |
4 To PP @ 350°F, 40psi, 0.5 sec |
5 To PE @ 350°F, 40psi, 0.5 sec |
【新闻资讯】查看全部
《塑料焊缝无损检测方法》四大标准明年3月1日实施
2015-12-24 据悉,福建省质检院国家塑料质检中心作为第一起草者,编制的JB/T 12530.3-2015《塑料焊缝无损检测方法 第3部分:射线检测》标准将于2016年3月1日颁布实施。该标准是工信部批准的行业标准JB/T 12530-2015《塑料焊缝无损检测方法》的4个系列标准(JB /T 12530.1~4-2015)之一。 JB/T 12530-2015《塑料焊缝无损检测方法》分四部分。 第1部分:通用要求。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |