牌号简介 About |
---|
KYDEX® 6200 LTR适用于需要符合SMP800C标准的轨道交通内部应用。KYDEX® 6200 LTR是我们的高性能热塑性板产品系列中的下一代,用于铁路和公共汽车内饰。它是一个成本效益的替代玻璃钢,因为它更容易制造。当按照ASTM E-662和ASTM E-162进行测试时,本产品符合联邦交通管理局(FTA)和联邦铁路管理局(FRA)关于烟雾排放和可燃性的推荐防火规范。建议的应用:座椅靠背窗显示隔板部件天花板部件,专门为符合SMP800C的轨道交通行业设计,满足轨道交通的火焰蔓延和烟雾密度要求,良好的可成形性和制造质量,良好的定义,允许紧公差,易于修整。 KYDEX® 6200 LTR is formulated for mass transit interior applications where SMP800C compliance is required. KYDEX® 6200 LTR is the next generation in our line of high performance thermoplastic sheet products for rail and bus interiors. It is a cost effective alternative to FRP due to its greater ease of fabrication. This product meets the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability when tested as per ASTM E-662 and ASTM E-162. Suggested Applications Seatbacks Window Reveal Bulkhead Components Ceiling Components Features Specifically designed for mass transit industries Compliant with SMP800C Meets flamespread and smoke density requirements for mass transit Excellent formability and fabrication quality Good definition Allows for tight tolerances Easy trimming |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.58 | g/cm³ | ASTM D792 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,退火 0.45 MPa, annealed |
82.2 | ℃ | ASTM D648 |
1.8 MPa,退火 1.8 MPa, annealed |
71.1 | ℃ | ASTM D648 |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
辐射板火焰蔓延指数 Radiation plate flame spread index |
Pass | ASTM E162 | |
Smoke Developed Smoke Developed 2 |
Pass | ASTM E662 | |
毒性 toxicity 3 |
内部方法 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸模量 Tensile modulus |
|||
3.18 mm 3.18 mm |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
|||
屈服,3.18 mm Yield, 3.18 mm |
MPa | ASTM D638 | |
弯曲模量 Bending modulus |
|||
3.18 mm 3.18 mm |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
3.18 mm 3.18 mm |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 4 mins |
3 SMP 800C |
【新闻资讯】查看全部
北京宝冠助剂在吉林投建5.2亿碳纤维产业链项目
2022-05-22 5月17日,北京宝冠 助剂 有限公司总投资5.2亿元的年产3万吨 碳纤维 原丝油剂、6000吨上浆剂、3万吨 环氧树脂 生产线项目正式签约落户吉林经济技术开发区。 吉林市作为中国碳纤维产业 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |