牌号简介 About |
---|
TitanPro JM-370K是一种高流动性材料。该基础符合21 CFR 177.1520(a)(3)(i)和(c)3.1a中规定的美国食品药品监督管理局的要求。佐剂符合各自的FDA法规和21 CFR 177.1520(b)。总之,该树脂符合FDA标准,包括聚烯烃制品和食品接触用制品的成分的安全使用。TSCA注册:CAS 9010-79-1 Titanpro JM-370K is a high flow material. The base meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520(a)(3)(i) and (c)3.1a. The adjuvants meet their respective FDA regulations and 21 CFR 177.1520(b). In summary, this resin meets the FDA criteria covering safe use of polyolefin articles and component of articles intended for food contact use. TSCA Registry: CAS# 9010-79-1. APPLICATIONS Huge home appliances case and cover, washing machine tub, automotive parts, housewares, large flat trays, thin walled articles, base resin for compounding, furniture. ADVANTAGES: Easy processability, permitting wider latitude in design. Good balance of strength and impact resistance. Good toughness at low temperature. Good surface finish and color. Improvement in mold release and anti-static. Low molded in stresses. FABRICATION Equipment - ram or screw injection machines. Techniques - standard processing. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
30 | g/10min | ASTM D1238 |
收缩率 Shrinkage rate |
|||
MD MD |
1.3 到 1.4 | % | |
吸水率 Water absorption rate |
|||
24hr 24hr |
0.020 | % | ASTM D570 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
78 | J/m | ASTM D256-A |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
屈服 yield |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790B |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
ICIS:聚酯瓶片紧平衡仍会持续
2022-09-14 扫描上图二维码,可以免费下载 搜料 APP 今年以来,石化市场对全球经济衰退充满期待。在包括中国在内的亚洲石化市场,今年许多石化产品利润持续低迷。然而,ICIS最近发布的报告显 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |