![](/page/pc/images/result/icon-datasheet-right-ad-none.png)
![](/page/pc/images/result/icon-datasheet-right-ad-none.png)
![](/page/pc/images/result/downloads-img2.png)
公司信息及水印
![](/page/pc/images/result/downloads-img4.png)
![](/page/pc/images/result/downloads-img1.png)
![](/page/pc/images/result/downloads-tag3.png)
![](/page/pc/images/result/downloads-img1.png)
![](/page/pc/images/result/downloads-tag3.png)
![](/page/pc/images/result/downloads-img3.png)
牌号简介 About |
---|
CORTON 1078/2 HS UV2是一种20%滑石填充聚丙烯共聚物。这是一个高流动注射成型等级开发的刚性部件需要良好的冲击强度和尺寸稳定性。它已经稳定下来,以满足汽车热老化和内部风化的要求。 Corton 1078/2 HS UV2 is a 20% talc filled polypropylene copolymer compound. It is a high flow injection moulding grade developed for rigid components requiring good impact strength and dimensional stability. It has been stabilized to meet automotive heat ageing and interior weathering requirements. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.05 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
20 | g/10min | ASTM D1238 |
收缩率 Shrinkage rate |
|||
MD:3.0 mm MD:3.0 mm |
1.0 到 1.3 | % | ASTM D955 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
3mm 3mm |
44 | J/m | ASTM D256 |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
3 mm 3 mm |
600 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,未退火,3.0 mm 0.45 MPa, unannealed, 3.0 mm |
℃ | ASTM D648 | |
1.8 MPa,未退火,3.00 mm 1.8 MPa, unannealed, 3.00 mm |
℃ | ASTM D648 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD:-30~30℃,3.00 mm MD:-30~30℃,3.00 mm |
1/℃ | ASTM D696 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
ASTM D2240 | ||
邵氏 D,3.00 mm Shore D, 3.00 mm |
ASTM D2240 | ||
邵氏 D,15 秒,3.00 mm Shore D, 15 seconds, 3.00 mm |
ASTM D2240 | ||
洛氏硬度 Rockwell hardness |
|||
R 级,3.00 mm R-grade, 3.00 mm |
ASTM D785 | ||
拉伸强度 tensile strength 2 |
|||
3 mm 3 mm 2 |
MPa | ASTM D638 | |
拉伸应变 Tensile strain 2 |
|||
断裂,3 mm Fracture, 3 mm 2 |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
3 mm 3 mm |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 2.0 in/min |
【新闻资讯】查看全部 ![]()
蛋壳 它在塑料里还有大用处
2016-03-23 一项新的研究表明,鸡蛋壳这种看似无用的废弃物能够帮助显著提高生物塑料的性能,从而有助于缓解塑料造成的环境污染和资源消耗问题。 蛋壳 它在塑料里还有大用处 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |