牌号简介 About |
---|
PA66混合物,部分芳香成分,30%玻璃纤维增强和热稳定。本产品适用于饮用水接触/冷水。对于所有对硬度要求高的注塑件,需要饮用水审批。 PA66 blend with partially aromatic content, 30% glass fibre reinforcement and heat stabilization. This Product is suitable for drinking water contact / coldwater. For all kind of injection moulding parts with high requirements to stiffness which a drinking water approval is needed. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.34 | g/cm³ | |
吸水率 Water absorption rate |
|||
饱和,23℃ Saturation, 23 ℃ |
4.8 | % | |
平衡,23℃,50% RH Equilibrium, 23 ℃, 50% RH |
1.8 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
11000 | MPa | |
拉伸强度 tensile strength |
|||
断裂 fracture |
215 | MPa | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ||
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
23℃ 23℃ |
kJ/m² | ||
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
|||
23℃ 23℃ |
kJ/m² | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ||
熔融温度 Melting temperature 2 |
℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ||
介电强度 Dielectric strength |
kV/mm | ||
相比漏电起痕指数 Compared to the leakage tracing index |
V | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
可燃性等级 Flammability level |
|||
1.6 mm 1.6 mm |
备注 |
---|
2. 10°C/min |
【新闻资讯】查看全部
温州瑞安又见毒跑道 塑胶跑道谁来解毒
2016-05-24 5月21日,一条微博在网络上引起了诸多关注。温州网友“涂鸦客LX”称温州瑞安市的玉海中心小学(原一小)新校区惊现毒跑道,多位孩子出现流鼻血,过敏、咳嗽,反复发烧等症状。记者核实后确定,确有一些孩子出现问题,为安全起见,学校已于5月20日停课,将会安置临时校区上课,并对全校学生进行分批体检。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |