牌号简介 About |
---|
BCF纤维纺用均聚物Formolene® 4101O是一种低粘度、高度等规聚丙烯均聚物,主要用于复丝和大体积连续长丝纤维。它含有独特的稳定剂组合,使其具有优异的抗气体褪色性和适当的工艺稳定性。Formolene® 4101O符合21 CFR 177.1520中规定的美国食品药品管理局的所有要求,包括聚烯烃制品和用于直接接触食品的制品的成分的安全使用。 Formolene® 4101O is a low viscosity, highly isotactic, polypropylene homopolymer designed primarily for multifilament and bulk continuous filament fiber. It contains a unique combination of stabilizers, which give it excellent gas fading resistance and appropriate process stability. Formolene® 4101O meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. This material is free of animal-derived content. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
19 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃,注塑成型 23 ℃, injection molding |
27 | J/m | ASTM D256-A |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服,注塑成型 Yield, injection molding 2 |
34.0 | MPa | ASTM D638 |
拉伸应变 Tensile strain 2 |
|||
屈服,注塑成型 Yield, injection molding 2 |
9.0 | % | ASTM D638 |
弯曲模量 Bending modulus 3 |
|||
1% 正割,注塑成型 1% cut, injection molding 3 |
MPa | ASTM D790 | |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 2.0 in/min |
3 0.051 in/min |
【新闻资讯】查看全部
埃克森美孚耗资2亿美元扩张得州工厂烯烃弹性体新产能
2022-05-19 埃克森美孚公司耗资2亿美元来扩张位于美国得克萨斯州Baytown工厂烯烃类弹性体的产能。 此前,埃克森美孚宣布,该扩建项目计划于2022年中期投产,主要包括一个年产40万吨的装置,用 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |