牌号简介 About |
---|
SP-5034是一种硬质乙烯基注塑聚氯乙烯化合物,适用于要求最大爆裂强度的类似配置的配件和零件。SP-5034非常适合大直径管件。SP-5034是国家自然科学基金14号标准,符合61号标准健康影响要求。 SP-5034 is a rigid vinyl injection molding PVC compound for fittings and parts of similar configuration where maximum burst strength is required. SP-5034 is ideally suited for large diameter fittings. SP-5034 is listed with NSF under Standard 14, and meets Standard 61 health effects requirements. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.34 to 1.38 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD MD |
0.20 to 0.40 | % | ASTM D955 |
PVC单元分类 PVC unit classification |
12454-B | ASTM D1784 | |
Flow Ratio(199 to 204℃) Flow Ratio(199 to 204℃) 2 |
120 | Internal Method | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ASTM D256 | ||
-20℃,3.2mm -20℃,3.2mm |
37 | J/m | ASTM D256 |
23℃,3.2mm 23℃,3.2mm |
J/m | ASTM D256 | |
抗跌落冲击性 Resistance to drop impact 3 |
|||
23℃ 23℃ 3 |
J/cm | ASTM D4226 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
极限氧指数 Extreme oxygen index |
% | ASTM D2863 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Distance/Wall Thickness |
3 程序 A, C 1/2" R Tup |
【新闻资讯】查看全部
【自动预混料装置】科倍隆的配料处理系统,可批量添加
2020-10-21 搜料网资讯: 减少批量大小,频繁的产品更换,以及配方的增加,从而增加了在配混系统中对灵活性的需求。随着生产中对文档和可追溯性的更高要求, 处理原材料的更高程度的自动化 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |