公司信息及水印
牌号简介 About |
---|
Borcoat™ ME0433是马来酸酐接枝聚乙烯,该产品以粉末形式供应,用于喷涂。 Borcoat ME0433 is a maleic anhydride grafted polyethylene adhesive. The product is supplied as a powder for application by spray. Applications Borcoat ME0433 is recommended as an adhesive for a three layer PE system used in: Steel Pipe Coating Specifications Borcoat ME0433 is intended to fulfil following National and International standards, when appropriate industrial manufacturing standard procedures are applied and a continuous quality system is implemented and when used in combination with Borcoat™ HE3450, HE3450-H or HE3453 and a compatible Fusion Bonded Epoxy(FBE) powder. NF A49-710 CAN/CSA-Z245.21 ISO 21809-1 DIN 30670 Special Features Borcoat ME0433 is intended to be used as an adhesive for PE three layer systems at design temperatures between -40°C up to +90°C. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.934 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
4.0 to 6.0 | g/10min | ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
47 | ISO 868 | |
拉伸强度 tensile strength |
|||
断裂 fracture |
> 18.0 | MPa | ISO 527-2/50 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
> 700 | % | ISO 527-2/50 |
薄膜 film |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
剥离强度 peel strength 2 |
DIN 30670 | ||
23℃ 23℃ |
J | DIN 30670 | |
80℃ 80℃ |
J | DIN 30670 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Embrittlement temperature |
℃ | ASTM D746 | |
维卡软化温度 Vicat Softening Temp |
|||
A50 A50 |
℃ | ISO 306/A50 | |
熔融温度 Melting temperature |
|||
DSC DSC |
℃ | ISO 3146 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 3 layer |
【新闻资讯】查看全部
国际油价突破60美元/桶大关
2021-02-21 搜料网资讯: 春节长假期间,不仅外盘股市大涨,大宗商品表现尤其出色,国际油价突破60美元/桶大关,国际期铜价格接近2012年5月以来的高点,锡价亦连番大涨。 记者注意到,截至 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |