牌号简介 About |
---|
普立万的Maxxam系列聚丙烯和聚乙烯产品涵盖了广泛的应用、市场和性能要求。标准等级与碳酸钙、玻璃和滑石复合,以提供所需的性能平衡,包括硬度、耐久性、抗冲击性和耐热性。定制等级可提供紫外线稳定剂、热稳定剂、定制颜色、高冲击等功能。 PolyOne's Maxxam™ family of polypropylene- and polyethylene-based products covers a wide range of applications, markets and performance requirements. Standard grades are compounded with calcium carbonate, glass and talc to provide a desired balance of properties including stiffness, durability, impact resistance and heat resistance. Custom grades are available with features such as UV stabilizers, heat stabilizers, custom color, high impact, etc. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.06 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
12 到 22 | g/10min | ISO 1133 |
收缩率 Shrinkage rate |
|||
3.2 mm 3.2 mm |
1.0 | % | ISO 294-4 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服 yield 2 |
27.0 | MPa | ISO 527 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
16 | % | ISO 527-2 |
弯曲模量 Bending modulus 3 |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ISO 180 | ||
-40℃ -40℃ |
kJ/m² | ISO 180 | |
23℃ 23℃ |
kJ/m² | ISO 180 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
|||
1.50 mm 1.50 mm |
UL 94 | ||
燃烧速率 Burning rate |
mm/min | ISO 3795 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 2.0 in/min |
3 0.079 in/min |
【新闻资讯】查看全部
商务部:让重点生产生活物资“进得来、转得动、出得去”
2022-05-13 为保运力、保通畅、促消费,商务部按照国务院物流保通保畅工作领导小组统一部署,和相关部门一道着力打通物流堵点,让重点生产生活物资进得来、转得动、出得去。 这是商务部新 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |