牌号简介 About |
---|
Koylene ADL-CP是由IPCL通过采用荷兰M/S Basell工艺技术的Spheripol/Addipol技术从其位于巴罗达综合设施制造和销售的具有外部添加功能的聚丙烯共聚物球体的品牌名称。Koylene ADL-CP AER003N是一种无规共聚物等级,用于生产压力应用的管道、热成型和挤压吹塑食品接触应用的片材:该等级符合印度标准IS:10910“聚丙烯及其与食品、医药安全接触用共聚物规范”的要求。食品和饮用水”。本等级中的添加剂符合IS 10909中规定的正成分列表。该等级和添加剂也符合FDA:CFR标题21177.1520,烯烃聚合物。 Koylene ADL-CP is the brand name of polypropylene Copolymer spheribeads with external additivation manufactured and marketed by IPCL from its facility at Baroda complex through Spheripol/ Addipol technology adopting the process know-how of M/S Basell,The Netherlands . Koylene ADL-CP AER003N is a Random Copolymer grade manufactured to produce Pipes for Pressure applications, Sheets for Thermoforming and Extrusion Blow moulding FOOD CONTACT APPLICATIONS: This grade meets with the requirements of Indian Standard IS: 10910 on "Specifications for Polypropylene and its copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water". Additives incorporated in this grade conform to the positive list of constituents as prescribed in IS 10909.The grade and the additives also comply with the FDA : CFR Title 21,177.1520, Olefin polymers. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
ASTM D1238 | ||
230℃,2.16kg 230℃,2.16kg |
0.30 | g/10min | ASTM D1238 |
230℃,5.0kg 230℃,5.0kg |
1.0 | g/10min | ASTM D1238 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服,3.20 mm,注塑成型 Yield, 3.20 mm, injection molding 2 |
27.0 | MPa | ASTM D638 |
拉伸应变 Tensile strain 2 |
ASTM D638 | ||
屈服,3.20 mm,注塑成型 Yield, 3.20 mm, injection molding |
14 | % | ASTM D638 |
断裂,3.20 mm,注塑成型 Fracture, 3.20 mm, injection molded |
% | ASTM D638 | |
弯曲模量 Bending modulus 2 |
|||
3.20 mm,注塑成型 3.20 mm, injection molded 2 |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
3.2mm,注塑成型 3.2mm, injection molded |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火,3.2 mm,注塑成型 0.45 MPa, unannealed, 3.2 mm, injection molded |
℃ | ASTM D648 | |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 类型 1 |
【新闻资讯】查看全部 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |