牌号简介 About |
---|
VERSIFY™ 3200 弹性体是一种具有中等熔流率的树脂,因此适宜作为一种通用用途的薄膜树脂。它适用于流延薄膜、吹塑薄膜和BOPP,这种树脂是一种优异的密封剂,该树脂与PP具有优异的相容性,与PE之间具有优异的粘结力,可赋予产品以较低的热封起始温度、柔软度和高温性能。 主要特性 粒料 中等熔流率 优异的密封剂 与PP相容 软质聚丙烯 应用领域 吹塑薄膜 流延薄膜 BOPP 密封剂 符合以下法规: EU, No 10/2011 美国食品和药物管理局 FCN 909 美国食品和药物管理局法规 21 CFR 175.105(c)(5) 请查询法规以获取完备的细节资料。 VERSIFY™ 3200 Plastomer is a resin with a medium melt flow rate, therefore making it a general purpose film resin. It is suitable for cast film, blown film, and BOPP and is an excellent sealant. It has excellent compatibility with PP, excellent adhesion to PE and is an useful agent to bring low seal initiation temperature, softness and temperature performance. Main Characteristics Pellet Medium Melt Flow Rate Good sealant Compatible with PP Soft polypropylene Applications Blown Film Cast Film BOPP Sealant Complies with: EU, No 10/2011 U.S. FDA FCN 909 U.S. FDA 21 CFR 175.105(c)(5) Consult the regulations for complete details. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.876 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
8.0 | g/10min | ASTM D1238 |
总结晶性 Summary of crystallinity |
30 | % | 内部方法 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
玻璃化转变温度 Glass transition temperature |
-23.0 | ℃ | 内部方法 |
维卡软化温度 Vicat Softening Temp |
59.0 | ℃ | ASTM D1525 |
熔融温度 Melting temperature |
|||
DSC DSC |
℃ | 内部方法 | |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
光泽度 gloss |
ASTM D523 | ||
20°,1000 µm,模压成型 20 °, 1000 µ m, molded |
ASTM D523 | ||
60°,1000 µm,模压成型 60 °, 1000 µ m, molded |
ASTM D523 | ||
雾度 Haze |
|||
2000 µm,注塑成型 2000 µ m, injection molding |
% | ASTM D1003 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness 2 |
ASTM D2240 | ||
邵氏 A,模压成型 Shaw A, molded |
ASTM D2240 | ||
邵氏 D,模压成型 Shaw's D, molded |
ASTM D2240 | ||
拉伸强度 tensile strength |
|||
断裂,模压成型 Fracture, molded |
MPa | ASTM D638 | |
拉伸应变 Tensile strain 3 |
|||
断裂,模压成型 Fracture, molded 3 |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
1% 正割,模压成型 1% cut, molded |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 2,0 in/min |
3 10 秒后的硬度。 |
【新闻资讯】查看全部
“色”不可挡――Datacolor蜘蛛京东年末巨献优惠多多
2015-12-17 全球色彩管理领导品牌Datacolor®蜘蛛京东年末促销,优惠多多!著名摄影师王永辉老师说:“无校色,不后期!校色是让人上瘾,欲罢不能的一件事;在未经校色的显示器上做后期,毫无意义!” 把握色彩管理前瞻视角,心动不如行动 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |