牌号简介 About |
---|
Casico™ FR4802是一种热塑性无卤天然化合物,用于电缆的绝缘和/或护套。它具有良好的挤出性能和阻燃性。无机填料和新型成炭添加剂具有阻燃性。Casico™ FR4802的成分基于碳、氢、氧、硅和钙元素。因此,基于这些元素的化合物将是燃烧烟气的唯一重要成分。其他元素的浓度可能小于0.1%。Casico™ FR4802用于电力电缆、软线和建筑电线的90°C额定绝缘。此外,它还可以作为一种优越的护套化合物在聚氯乙烯替代应用中使用。本产品可用于对烟雾或腐蚀性和有毒燃烧产物敏感的区域。对于大多数电缆结构,Casico™ FR4802具有足够的阻燃性,以满足单线垂直燃烧试验。稳定后可与铜接触使用。Casico™ FR4802适用于以下电缆或原材料规范中所述的应用:EN 50292-2-26 EN 50290-2-27 NEMKO 184第1部分和5 SS4240200 VDE0207 TEIL 23(HI2)VDE0207 TEIL 24(HM2、HM4和HM5)VDE0250 TEIL 215 Casico FR4802 is a thermoplastic, low smoke zero halogen (LSZH) flame retardant, natural jacketing and insulation compound combining with excellent extrusion properties. The composition is based on the elements Carbon, Hydrogen, Oxygen, Silicon and Calcium. Compounds based on these elements will therefore be the only significant constituents of the combustion fumes. Other elements may be present in concentrations less than 0.1%. Specifications Casico FR4802 meets the applicable requirements below using sound commercial extrusion practice and testing procedures: -ASTM D 1248 Type I, Class A, Category 4 ISO 1872-PE KGHN-23D006 The following cable material standards are met by Casico FR4802: EN 50290-2-27 EN 50290-2-26 EN 50363-8 TM7 BS 7655 LTS2 EN 50363-7 TI6 & TI7 VDE 0207 Teil 23 (HI2) and Teil (HM2, HM4 & HM5) Cables manufactured with Casico FR4802 using sound extrusion practice normally comply with the following cable product standards: BS 7211 IEC 60502 Part 1 ST3 |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density 3 |
1.15 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
0.40 | g/10min | ISO 1133 |
吸水率 Water absorption rate 3 |
|||
70℃ 70℃ 3 |
0.100 | mg/cm² | IEC 60811-1-3 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,15 秒 Shore D, 15 seconds |
40 | ISO 868 | |
拉伸强度 tensile strength 4 |
13.0 | MPa | IEC 60811-1-1 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | IEC 60811-1-1 | |
弯曲模量 Bending modulus |
MPa | ISO 178 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Embrittlement temperature |
℃ | ISO 974 | |
低温弯曲 Low temperature bending 5 |
|||
-40℃ -40℃ 5 |
IEC 60811-1-4 | ||
低温冲击 Low temperature shock 5 |
|||
-40℃ -40℃ 5 |
IEC 60811-1-4 | ||
老化性能 Aging performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度的变化率 在空气中(100℃,10 hr) The rate of change in tensile strength in air (100 ℃, 10 hr) |
% | IEC 60811-1-2 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity 6 |
ohms·cm | IEC 60093 | |
介电强度 Dielectric strength |
kV/mm | IEC 60243-1 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Breakdown Duration Breakdown Duration 5 |
IEC 60227-2/2.3 | ||
击穿电压 breakdown voltage 5 |
V | ISO 6722 | |
锥形量热试验 Cone calorimetry test |
ISO 5660 | ||
平均热释放速率 Average heat release rate 7 |
kW/m² | ISO 5660 | |
CO CO 7 |
kg/m³ | ISO 5660 | |
CO2 CO2 8 |
kg/m³ | ISO 5660 | |
燃烧热 Combustion heat 9 |
ISO 5660 | ||
点燃时间 Ignition time 7 |
min | ISO 5660 | |
最大热释放速率 Maximum heat release rate 7 |
kW/m² | ISO 5660 | |
Smoke Obscuration Smoke Obscuration 10 |
ISO 5660 | ||
Corrosion(of Combustion Fumes) Corrosion(of Combustion Fumes) 11 |
µS/cm | IEC 60754-2 | |
热压测试 Hot pressing test 12 |
|||
90℃ 90℃ 12 |
% | IEC 60811-3-1 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Compound, ISO 1872-2 |
3 4 days, Cable (0.7 mm insulation over 1.5 mm² solid Cu) |
4 2.0 in/min |
5 Cable (0.7 mm insulation over 1.5 mm² solid Cu) |
6 Compound |
7 heat flux 35 kW/m2, 3 mm plaque |
8 heat flux 35 kW/m2 |
9 heat flux 35 kW/m2, 3 mm plaque, MJ/dm3 |
10 heat flux 35 kW/m2, 3 mm plaque, m2/dm3 |
11 Compound, 5.3 |
12 at high temperature, 4 hrs, Cable (0.7 mm insulation over 1.5 mm² solid Cu) |
【新闻资讯】查看全部
200万吨/年PX、中能源200万吨化工新材料等项目
2021-03-21 搜料网资讯: 12月2日至3日,东营市举行2019年全市重点项目观摩,集中展现去年以来全市项目建设的重要成果。 今年观摩的38个项目中,投资过20亿元的有7个,过50亿元的有5个,过百亿 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |