牌号简介 About |
---|
对于钢管保护(装箱),维斯塔明NRG 4101提供了一个灵活、机械坚固的装箱系统,该系统结合了聚乙烯涂层和水泥砂浆套管的优点。Vestamid NRG产品的用途:Vestamid NRG 4101作为包装材料的重要优点是:具有极高的抗冲击性和韧性,即使在低温下也具有优异的抗应力开裂性、优异的耐磨性、低滑动摩擦系数。与其他包装材料相比,产品特性为:952795。27的肖氏硬度高于聚乙烯或聚丙烯。因此,与聚乙烯或丙烯外包装不同,聚酰胺外包装除了提供屏障效应的防腐保护外,还提供了外包装钢管的机械保护。新包装材料的应用领域可在非常规安装技术中找到,例如:水平定向钻孔、无转向位移锤的土壤置换法、动态夯实犁技术。我们建议处理温度在230°C(446°F)到260°C(500°F)之间,在某些情况下可达到280°C(536°F)-挤压过程中。建议在加工前在80°C(176°F)下干燥2小时至4小时。 For Steel Pipe Protection (Encasement) VESTAMID® NRG 4101 offers a flexible, mechanically tough encasement system that combines the advantages of polyethylene coating and cement mortar casing. Uses of VESTAMID® NRG Products: The important advantages of VESTAMID® NRG 4101 as an encasement material are: unusually high impact resistance and toughness, even at low temperatures excellent stress cracking resistance excellent wear resistance low sliding friction coefficient Product characteristics compared with other encasement materials: VESTAMID® NRG 4101 yellow has higher Shore hardness than polyethylene or polypropylene. In contrast to polyethylene or propylene encasement, therefore, the polyamide encasement offers, apart from the corrosion protection provided by the barrier effect, also mechanical protection for the encased steel pipe. Application areas for the new encasement material are found in non-conventional installation technologies such as: horizontal directional drilling the soil displacement method with non-steered displacement hammers dynamic ramming plow technology |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.02 | g/cm³ | ISO 1183 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
|||
-40℃ -40℃ |
无断裂 | ISO 179/1eU | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
170 | ℃ | ISO 306/A |
熔融温度 Melting temperature 3 |
177 | ℃ | ISO 11357-3 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
73 | ISO 868 | |
球压硬度 Ball hardness 2 |
MPa | ISO 2039-1 | |
拉伸模量 Tensile modulus |
MPa | ISO 527-2 | |
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
ISO 527-2 | ||
屈服 yield |
% | ISO 527-2 | |
断裂 fracture |
% | ISO 527-2 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 H30 |
3 2nd Heating |
【新闻资讯】查看全部
绿色增塑剂破解“白色污染” 河南学者点“塑”成金
2017-11-23 “双11”的消费高潮已经过去,但快递业塑料包装的浪费和对环境的污染一直在持续。塑料造成的“白色污染”有“解药”可治了,河南省研制的绿色增塑剂已具备大规模工业化生产的条件。 11月22日,记者从河南省绿色增塑剂工程研究中心了解到,该中心研制的绿色塑化剂已经完成了工业化试验,不仅打破欧洲少数国家在这一领域长达数十年的市场垄断,而且市场价格也将大幅下降。 “塑化剂在塑料制品里的含量一般达一半左右,那些被认为不可降解的塑料垃圾将变得可降解,大家一直担忧的塑化剂对人类 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |