牌号简介 About |
---|
STERLENE™ BMU147E是一种用于注塑成型的复合矿物填充聚丙烯(TPO),具有良好的冲击和硬度,适用于汽车内部应用。 STERLENE™ BMU147E is a compounded mineral filled polypropylene (TPO) for injection molding, characterised by good impact and stiffness, suitable for automotive interior application. |
产品描述 Product Description
用途:汽车领域的应用;汽车内部零件;
加工条件:注射成型 Injection Molding
性能特点: 机械强度好; 冲击性能好; Good Rigidity,High impact resistance
填料:矿物
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.03 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate 2 |
|||
230℃,2.16kg 230℃,2.16kg 2 |
18 | g/10min | ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
|||
23℃ 23℃ |
1710 | MPa | ISO 527-1-2 |
23℃ 23℃ |
2040 | MPa | ISO 527-2/50 |
拉伸强度 tensile strength |
|||
屈服,23℃ Yield, 23 ℃ |
19.0 | MPa | ISO 527-2/50 |
拉伸应变 Tensile strain |
ISO 527-2/50 | ||
屈服,23℃ Yield, 23 ℃ |
% | ISO 527-2/50 | |
断裂,23℃ Fracture, 23 ℃ |
% | ISO 527-2/50 | |
弯曲模量 Bending modulus 3 |
|||
23℃ 23℃ 3 |
MPa | ISO 178 | |
弯曲强度 bending strength 3 |
|||
23℃ 23℃ 3 |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
23℃,局部断裂 23 ℃, localized fracture |
kJ/m² | ISO 179 | |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃,局部断裂 23 ℃, localized fracture |
kJ/m² | ISO 180-A | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/Af |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 程序 B |
3 0.079 in/min |
【新闻资讯】查看全部
百吨级高强高模聚酰亚胺纤维制备技术获得科技成果鉴定
2022-03-27 3月21日,百吨级高强高模 聚酰亚胺 ( PI )纤维制备技术及应用项目在北京通过了由中国石油和化学工业联合会组织的科技成果鉴定。由中国工程院院士曹湘洪、陈祥宝、蹇锡高,中国科 |