牌号简介 About |
---|
Mold Max硅酮是一种锡固化的硅橡胶化合物,具有优异的工作性能和使用寿命。Mold Max Silicones在独家的“天秤座”催化剂上具有光滑的特性,使用寿命长。Mold Max硅树脂可以用硅生猪硅着色剂着色。可浇铸硅酮的适用期为45分钟,在室温下固化过夜。Mold Max Silicones将重现最佳细节,适用于各种工业和艺术相关应用,包括制作用于复制原型、家具、雕塑和建筑元素的模具。模具最大10,20,25和30硅酮可以加厚thi-vex添加剂刷应用。(注:THI-VEX与模具MAX 40或60不兼容)。铸模Max 60为铸造金属提供最高的耐热性(见单独的技术公告)。Mold Max硅酮可用于铸造各种材料,包括蜡、石膏、低熔合金/金属和聚氨酯、环氧树脂或聚酯树脂(不使用脱模剂)。 Mold Max® Silicones are tin-cured silicone rubber compounds that have exceptional working properties and library life. Mold Max® Silicones feature Smooth-On's exclusive "Libra®" catalyst for long library life. Mold Max® silcones can be pigmented with Silc Pig® silicone colorants. Pot life for the pourable silicones is 45 minutes and they cure overnight at room temperature. Mold Max® Silicones will reproduce the finest detail and are suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculpture and architectural elements. Mold Max® 10, 20, 25 and 30 silicones can be thickened with THI-VEX® additive for brush-on applications. (Note: THI-VEX® is NOT compatible with Mold Max® 40 or 60). Mold Max® 60 offers highest heat resistance for casting metal (see separate technical bulletin). Mold Max® Silicones can be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins (without using a release agent). |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.18 | g/cm³ | ASTM D1475 |
特定体积 Specific volume |
0.849 | cm³/g | ASTM D1475 |
收缩率 Shrinkage rate |
|||
MD MD |
0.20 | % | ASTM D2566 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
30 | ASTM D2240 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
断裂 fracture |
3.98 | MPa | ASTM D412 |
100% 应变 100% strain |
MPa | ASTM D412 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D412 | |
撕裂强度 tear strength 2 |
kN/m | ASTM D624 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
储存稳定性 storage stability |
min | ||
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脱模时间 stripping time |
min | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
混合比 Mixing ratio |
|||
工作温度 working temperature |
℃ |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 B 模具 |
【新闻资讯】查看全部
宁高宁:中化集团没有与中国化工兼并的方案
2018-03-07 针对近年来传闻甚多的中化集团和中国化工合并一事,中化集团董事长宁高宁表示公司没有和中国化工合并的计划。 中化集团与中国化工合并的传闻,最早由英国金融时报在2016年10月14透出,导致中化系相关概念股股价集体拉升。随后中化国际发布公告,否认这一传闻。 2017年5月,中化集团与中国化工合并传闻再起,一度引发媒体的议论与猜想。此次宁高宁对合并一事的表态,可以为坊间的传闻画上一个句号了。 中国中化集团成立于1950年,主业分布在能源、农业、化工、 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |