牌号简介 About |
---|
Shin Etsu Keg-2000-30是一种液体注射成型硅胶。它作为两种成分提供,以1:1的比例混合,以确保轻松和准确的混合。KEG-2000-30的粘度很低,可以很容易地泵送到大多数注塑系统中。高温快速固化时间。室温下使用寿命长。典型应用O型环。隔膜。盖帽。橡胶辊。连接器填料。其他电气部件。 Shin-Etsu KEG-2000-30 is a liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KEG-2000-30 is low enough to allow easy pumping through most injection molding systems. Rapid cure time at elevated temperature. Long pot life at room temperature. Typical Applications O-rings. Diaphragms. Capping. Rubber rollers. Connector packings. Other electrical parts. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.10 | g/cm³ | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
32 | ||
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
8.50 | MPa | |
100% 应变 100% strain |
0.703 | MPa | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
750 | % | |
撕裂强度 tear strength 2 |
kN/m | ||
压缩形变 Compression deformation |
|||
180℃,22 hr 180℃,22 hr |
% | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
贮藏期限 Storage period |
|||
32℃ 32℃ |
wk | ||
后固化时间 Post curing time |
|||
200℃ 200℃ |
hr | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
固化时间 Curing time |
hr |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 B 模具 |
【新闻资讯】查看全部
一文读懂光滑剂
2016-08-31 润滑剂是一类用来改善塑料,橡胶等聚合物的加工性能和表观性能的助剂。除一般意义上的减少磨擦,提高树脂或胶料加工过程中的流动性和脱模性作用外,润滑剂的功能还可延伸到增加制品的表面光洁性,防止制品之间相互粘连等界面性能方面。就加工改性作用而言,润滑剂在聚合物加工过程主要降低树脂或胶料与加工设备之间和聚合物分子之间的相互磨擦,进而达到降低扭矩,节约能耗,促进流动和提高质量的目的。 润滑剂可分为内、外润滑剂两种,内、外润滑剂的区分主要依其与树脂的相容性大小。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |