牌号简介 About |
---|
NEONIT® SK80 L8G是一种长玻璃纤维增强环氧树脂模塑料,在宽温度范围和气候条件下具有优异的长期性能保持。特别适用于大型换向器的二次成型和制造。 NEONIT® SK80 L8G is a long glass fiber reinforced epoxy molding compound with excellent long term property retention over a wide temperature range and climate conditions. It is particularly suited for over molding and manufacturing of large commutators. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.79 | g/cm³ | ISO 1183 |
表观密度 Apparent density |
0.59 | g/cm³ | ISO 60 |
收缩率 Shrinkage rate |
0.11 | % | ISO 2577 |
吸水率 Water absorption rate |
|||
平衡,23℃,50% RH Equilibrium, 23 ℃, 50% RH |
0.050 | % | ISO 62 |
后收缩 Post contraction |
-0.020 | % | ISO 2577 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
MPa | ISO 527-2 | |
拉伸强度 tensile strength |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2 | |
弯曲模量 Bending modulus |
MPa | ISO 178 | |
弯曲强度 bending strength |
MPa | ISO 178 | |
压缩强度 compressive strength |
MPa | ISO 604 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
kJ/m² | ISO 179 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
玻璃化转变温度 Glass transition temperature |
℃ | TMA | |
线性热膨胀系数 Linear coefficient of thermal expansion |
TMA | ||
MD MD |
1/℃ | TMA | |
TD TD |
1/℃ | TMA | |
导热系数 Thermal conductivity coefficient |
W/m/K | ASTM E1461 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
kV/mm | IEC 60243-1 | |
耗散因数 Dissipation factor |
|||
23℃,1 MHz 23℃,1 MHz |
IEC 60250 | ||
相比漏电起痕指数 Compared to the leakage tracing index |
V | IEC 60112 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
路博润添加剂亚太区副总裁董剑伟:亚洲对全球润滑油市场的影响力不
2021-07-03 搜料网资讯: 尽管亚太地区的润滑油市场在2020年同样遭受了新冠疫情的重创,但它已在市场复苏的进程中担起了领头羊的角色。 据中国国家统计局发布的统计数据显示,中国2020年国内 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |