牌号简介 About |
---|
液体硅橡胶(LSR)医疗器械和部件制造的原材料在医疗保健行业中的应用硅橡胶Q7-7840液体硅橡胶、硅橡胶Q7-7850液体硅橡胶和硅橡胶Q7-7870液体硅橡胶(A和B部分)是热固化弹性体,供制造医疗器械的客户使用。包括那些打算植入人体不到30天和非植入应用。硅橡胶Q7-7840液体硅橡胶、Silastic® Q7-7850液体硅橡胶和硅橡胶Q7-7870液体硅橡胶是专为液体注射成型或支撑挤压设计的两部分铂催化硅橡胶。弹性体作为一个由两部分组成的套件(A部分和B部分)提供,在使用前必须将等量(按重量)的弹性体充分混合在一起。弹性体通过加成固化(铂催化)反应进行热固化。如图所示混合和固化后,合成的弹性体由交联二甲基和甲基乙烯基硅氧烷共聚物和增强二氧化硅组成。弹性体可在不进行任何后固化的情况下使用。此外,与大多数其他热固性弹性体和热塑性塑料相比,固化弹性体的热稳定性高达204°C(400°F),可进行高压灭菌,并具有较高的透气性。 Liquid Silicone Rubber (LSR) raw material for medical device and component fabrication in the Healthcare Industry APPLICATIONS Silastic® Q7-7840 Liquid Silicone Rubber, Silastic ® Q7-7850 Liquid Silicone Rubber, and Silastic ® Q7-7870 Liquid Silicone Rubber, Parts A and B, are heat-cured elastomers for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. Silastic Q7-7840 Liquid Silicone Rubber, Silastic Q7-7850 Liquid Silicone Rubber, and Silastic Q7-7870 Liquid Silicone Rubber are two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion. The elastomer is supplied as a two-part kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomers are thermally cured via an addition-cure (platinum catalyzed) reaction. When blended and cured as indicated the resulting elastomers consist of crosslinked dimethyl and methyl-vinyl siloxane copolymers and reinforcing silica. The elastomer can be used without any post-cure. Furthermore, the cured elastomer is heat stable up to 204°C (400°F), can be autoclaved, and exhibits high gas permeability compared with most other thermoset elastomers and thermoplastics. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.13 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD MD |
2.3 | % | 内部方法 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
48 | ASTM D2240 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
9.00 | MPa | ASTM D412 |
200% 应变 200% strain |
2.60 | MPa | ASTM D412 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D412 | |
撕裂强度 tear strength 2 |
kN/m | ASTM D624 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
固化速率 Curing rate 3 |
|||
MDR T90,150℃ MDR T90,150℃ 3 |
sec |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 B 模具 |
3 3 min |
【新闻资讯】查看全部
高分子材料有望革新迷彩装备
2021-06-26 搜料网资讯: 科学家们正在研究采用有机高分子材料生产军队迷彩伪装装备,可随周围环境的变化而改变颜色。该研究目前已接近成功。 太阳镜、防眩目后视镜和电子显示装置等均可采 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |