牌号简介 About |
---|
PRM-12C是一种经认证的一级澄清注塑共聚物,专门为需要高清晰度和良好抗冲击性的薄壁应用而设计。PRM-12C具有中高流速、很好的加工性、快速的模具填充、快速的循环时间、很好的尺寸稳定性、低翘曲和良好的机械性能平衡。PRM-12C的典型应用包括高清晰度的高质量家庭用品、薄壁高光泽刚性包装和高质量消费品。PRM-12C符合FDA法规21CFR 177.1520(a)(3)(i)/(c)3.1+3.2,以及大多数与食品接触使用聚丙烯相关的国际法规。 PRM-12C is a certified prime grade Clarified Injection Molding copolymer specially designed for thin-walled applications requiring excellent clarity and good impact resistance. PRM-12C exhibits medium-high flow rate, very good processability, rapid mold filling, fast cycle time, very good dimensional stability, low warpage, and good balance of mechanical properties. PRM-12C typical applications include high quality housewares where high clarity is a most, thin-wall high gloss rigid packaging, and high quality consumer articles. PRM-12C complies with FDA regulation 21CFR 177.1520 (a)(3)(i) / (c)3.1 + 3.2, and most international regulations concerning the use of Polypropylene in contact with food. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
12 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃,注塑成型 23 ℃, injection molding |
80 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火,注塑成型 0.45 MPa, unannealed, injection molded |
87.0 | ℃ | ASTM D648 |
维卡软化温度 Vicat Softening Temp |
128 | ℃ | ASTM D1525 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服,注塑成型 Yield, injection molding 2 |
MPa | ASTM D638 | |
拉伸应变 Tensile strain 2 |
|||
屈服,注塑成型 Yield, injection molding 2 |
% | ASTM D638 | |
弯曲模量 Bending modulus 3 |
|||
1% 正割,注塑成型 1% cut, injection molding 3 |
MPa | ASTM D790 | |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 2.0 in/min |
3 0.051 in/min |
【新闻资讯】查看全部
又涨了!巴斯夫将提高北美特定聚醚胺的价格
2021-07-03 搜料网资讯 2021年7月1日,巴斯夫宣布自 2021年7月10日起或在现有合同允许的情况下,将提高在北美以 Baxxodur品牌销售的精选聚醚胺的价格。 产品价格上涨 聚醚胺 D230(Baxxodur EC 301)0.1 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |