牌号简介 About |
---|
本产品为聚氨酯系统。应用板料成形夹具、模板、铸模、控制铸件、底片性能、厚浇注料、极高强度、尺寸精确、可加工性 This product is a polyurethane system. Applications Sheet metal forming fixtures Pattern plates Foundry patterns Control castings Negatives Properties thick castable very high strength dimensionally accurate workable |
技术参数 Technical Data | |||
---|---|---|---|
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
3.0 到 4.0 | kJ/m² | ISO 179 |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
20℃ 20℃ |
1.70 到 1.80 | g/cm³ | |
粘度 viscosity |
|||
25℃ 25℃ |
9.0 到 13 | Pa·s | |
固化时间 Curing time |
|||
20℃ 20℃ |
12 到 16 | hr | |
储存稳定性 storage stability 2 |
|||
20 ℃ 20 ℃ 2 |
18 到 22 | min | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ISO 7619 | ||
弯曲模量 Bending modulus |
MPa | ISO 178 | |
弯曲强度 bending strength |
MPa | ISO 178 | |
压缩强度 compressive strength |
MPa | ISO 604 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | DIN 53752 | |
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 200 g |
【新闻资讯】查看全部
中粮科技设子公司建丙交酯项目
2021-11-09 搜料网资讯: 近日,中粮科技发布公告称,拟以自有货币资金1.5亿元设立生物材料公司子公司,公司持股比例100%。 设立新公司名称暂定为中粮生物材料(榆树)有限公司,注册资本为1. |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |