牌号简介 About |
---|
当生产细节的性能要求500S系列与600S系列结合使用时,建议使用660S系列。因此,半填充材料可以结合其他两个系列的优点。该材料具有良好的流动性、力学性能和合理的抗划伤性能。600S系列化合物的硬度从邵尔A到90邵尔A,有天然和黑色两种颜色,但在任何阴影下都很容易上色。 The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.05 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,5.0kg 190℃,5.0kg |
15 | g/10min | ASTM D1238 |
收缩率 Shrinkage rate |
0.80 到 2.0 | % | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
撕裂强度 tear strength |
38.0 | kN/m | ASTM D624 |
压缩形变 Compression deformation |
|||
23℃,72 hr 23℃,72 hr |
28 | % | ASTM D395 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
使用温度 Operating temperature |
℃ | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Overmold Bonding(to PP) Overmold Bonding(to PP) |
|||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
ASTM D2240 | ||
拉伸强度 tensile strength |
ASTM D638 | ||
-- -- |
MPa | ||
100% 应变 100% strain |
MPa | ||
300% 应变 300% strain |
MPa | ||
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
中国分解橡胶产业找到转型目的
2016-01-26 面对严峻的外部形势,合成橡胶产业的转型升级已经迫在眉睫,突破口就在于研发生产绿色环保型高端产品。 去年10月,中国橡胶工业协会正式发布了《橡胶行业“十三五”发展规划指导纲要》,全面总结了橡胶工业“十二五”期间的成就和经验,并围绕《中国制造2025》和《中国橡胶工业强国发展战略研究》的总目标。 高端需求旺盛 据海关公布的资料,2015年1-10月,中国进口合成橡胶146.39万吨,同比增加17.9%。而这些进口 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |