牌号简介 About |
---|
Cosmic FARBOSET® 2461黑色是一种矿物填充环氧树脂模塑料,具有固化速度快、可塑性好、抗热震性和防潮性优异。这种化合物的特殊配方是为了在非常薄的截面上实现高的玻璃化转变温度,以获得最佳的可靠性性能。它被设计用来封装各种设备,包括电容器、电阻和电感线圈。 Cosmic FARBOSET 2461 Black is a mineral-filled epoxy molding compound featuring fast cure rates, superb moldability, excellent thermal shock and moisture resistance. This compound was especially formulated to achieve a high glass transition temperature for optimum reliability performance in very thin sections. It is designed to encapsulate a wide range of devices including capacitors, resistors, and inductor coils. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
-- -- |
1.88 | g/cm³ | |
-- -- 2 |
2.08 | g/cm³ | |
表观密度 Apparent density 3 |
0.90 | g/cm³ | |
螺旋流动长度 Spiral flow length |
76.0 | cm | |
收缩率 Shrinkage rate |
|||
MD MD |
0.40 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
MPa | ||
弯曲模量 Bending modulus |
MPa | ||
弯曲强度 bending strength |
MPa | ||
压缩强度 compressive strength |
MPa | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | ||
体积电阻率 Volume resistivity |
ohms·cm | ||
介电强度 Dielectric strength |
|||
6.35 mm 6.35 mm |
kV/mm | ||
介电常数 Dielectric constant |
|||
1 kHz 1 kHz |
|||
耗散因数 Dissipation factor |
|||
1 kHz 1 kHz |
|||
耐电弧性 Arc resistance |
sec | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
|||
3.20 mm 3.20 mm |
UL 94 | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
固化时间 Curing time |
|||
150℃ 150℃ 7 |
hr | ||
150℃ 150℃ |
hr | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
玻璃化转变温度 Glass transition temperature |
℃ | ||
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
|||
-- -- 4 |
cm/cm/℃ | ||
-- -- 5 |
cm/cm/℃ | ||
导热系数 Thermal conductivity coefficient |
W/m/K | ||
贮藏期限 Storage period 6 |
|||
4℃ 4℃ |
wk | ||
25℃ 25℃ |
wk | ||
35℃ 35℃ |
wk | ||
后固化时间 Post curing time |
|||
150℃ 150℃ |
hr |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Molded |
3 Powder |
4 Alpha 1 |
5 Alpha 2 |
6 Defined as not more than 40% loss of spiral flow based on original values. |
7 Hot Plate Cure Time |
【新闻资讯】查看全部
河源获批筹建广东省质量监视塑料模具产品检验站
2017-04-26 近日,省质监塑料模具产品检验站获省质监局批准筹建。该站由河源市质量计量监督检测所承建,建设工期预计为18个月,检验站建成使用后将服务河源市塑料模具产业发展。 该站将采购三坐标测量机、蓝光三维扫描仪关节测量臂、全自动影像测量仪等33台(套)主设备,为模具生产企业突破关键技术、新产品研发、新工艺应用提供检测服务。 模具产业是河源市重点发展的产业。当前,河源市积极谋划在国家级高新区规划3.1平方公里的模具产业园,着力打造河源深圳国际模具城,通过“深圳总部+河源基地 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |