牌号简介 About |
---|
产品描述酚醛模塑料,玻璃纤维增强和无机填充,弹性。很好的耐热性,很好的机械性能,减少了模具收缩和后收缩,良好的耐化学性。应用领域砂轮 Product Description Phenolic moulding compound, glass fibre-reinforced and inorganically filled, elasticized. Very good heat resistance, very good mechanical properties, reduced mould shrinkage and post-shrinkage, good chemical resistance. Application Areas Grinding wheels |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.62 | g/cm³ | ISO 1183 |
表观密度 Apparent density |
0.65 | g/cm³ | ISO 60 |
收缩率 Shrinkage rate 2 |
0.25 | % | ISO 2577 |
吸水率 Water absorption rate |
|||
23℃,24hr 23℃,24hr |
15.0 | mg | ISO 62 |
后收缩 Post contraction 2 |
0.50 | % | ISO 2577 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
MPa | ISO 527-1-2 | |
拉伸强度 tensile strength |
MPa | ISO 527-2/5 | |
弯曲模量 Bending modulus |
MPa | ISO 178 | |
弯曲强度 bending strength 3 |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
23℃ 23℃ |
kJ/m² | ISO 179/1eA | |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
|||
23℃ 23℃ |
kJ/m² | ISO 179/1eU | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
8.0 MPa,未退火 8.0 MPa, unannealed |
℃ | ISO 75-2/C | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | IEC 60093 | |
体积电阻率 Volume resistivity |
ohms·cm | IEC 60093 | |
介电强度 Dielectric strength 4 |
|||
1 mm 1 mm 4 |
kV/mm | IEC 60243-1 | |
相对电容率 Relative permittivity |
|||
100 Hz 100 Hz |
IEC 60250 | ||
耗散因数 Dissipation factor |
|||
100 Hz 100 Hz |
IEC 60250 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
压缩成型压力 Compression molding pressure |
MPa | ||
压缩成型温度 Compression molding temperature |
℃ |
备注 |
---|
2、Injection |
3、2.0 mm/min |
4、short term, electrode layout P25mm/P25mm in transformer oil equivalent to IEC 60296 |
【新闻资讯】查看全部
原材料涨价、芯片短缺等将致2021中国乘用车减产30万辆
2021-03-24 搜料网资讯: 2021年3月23日-24日2021年中国车身大会隆重召开。本次大会重点围绕整车轻量化、汽车安全法规、车身结构设计、车身先进材料、仿真技术、模块化架构车身等行业焦点话题 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |