牌号简介 About |
---|
20%玻璃纤维增强注塑级,机械性能优越 20% glass fibres reinforced injection moulding grade with superior mechanical properties |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.39 | g/cm³ | ISO 1183 |
吸水率 Water absorption rate |
ISO 62 | ||
饱和,23℃ Saturation, 23 ℃ |
0.40 | % | ISO 62 |
平衡,23℃,50% RH Equilibrium, 23 ℃, 50% RH |
0.20 | % | ISO 62 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus 2 |
|||
23℃ 23℃ 2 |
6900 | MPa | ISO 527-1-2 |
拉伸强度 tensile strength 2 |
|||
断裂,23℃ Fracture, 23 ℃ 2 |
100 | MPa | ISO 527-2/5 |
拉伸应变 Tensile strain 2 |
|||
断裂,23℃ Fracture, 23 ℃ 2 |
% | ISO 527-2/5 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength 3 |
|||
23℃ 23℃ 3 |
kJ/m² | ISO 179/1eA | |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength 3 |
ISO 179/1eU | ||
-30℃ -30℃ |
kJ/m² | ISO 179/1eU | |
23℃ 23℃ |
kJ/m² | ISO 179/1eU | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature 4 |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
熔融温度 Melting temperature 5 |
|||
DSC DSC 5 |
℃ | ISO 3146 | |
线性热膨胀系数 Linear coefficient of thermal expansion 6 |
|||
MD MD 6 |
1/℃ | DIN 53752 | |
最高使用温度 Maximum operating temperature |
|||
20000 h 20000 h |
℃ | IEC 216 | |
some hours some hours |
℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity 7 |
ohms | IEC 60093 | |
体积电阻率 Volume resistivity 7 |
ohms·cm | IEC 60093 | |
介电强度 Dielectric strength 7 |
kV/mm | IEC 60243-1 | |
相对电容率 Relative permittivity 7 |
|||
1 MHz 1 MHz 7 |
IEC 60250 | ||
耗散因数 Dissipation factor 7 |
|||
1 MHz 1 MHz 7 |
IEC 60250 | ||
相比漏电起痕指数 Compared to the leakage tracing index |
V | IEC 60112 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
0.80 mm 0.80 mm 8 |
UL 94 | ||
1.60 mm 1.60 mm 9 |
UL 94 |
备注 |
---|
2 Test Specimen accordng to ISO 3167, Type A |
3 80x10x4 mm |
4 110x10x4 mm |
5 10 K/min, Compound for moulding |
6 >10x10x4 mm |
7 80x80x1 mm |
8 125x13x0.8 mm |
9 125x13x1.6 mm |
【新闻资讯】查看全部
总投资9.7亿元!皇马科技年产10万吨新材料树脂项目投产
2021-01-02 搜料网资讯: 12月28日上午,上虞区区举行2020年上虞区三个一批大会战第四季度系列集中活动,59个总投资超过580亿元的重大项目集中签约、开工、投产。此次集中系列活动中,共有总投 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |