牌号简介 About |
---|
Arlon的AD系列是一组编织玻璃纤维增强聚四氟乙烯复合材料,设计用作印刷电路板基板。这些材料结合了聚四氟乙烯树脂优良的低损耗电性能和高性价比的重型玻璃纤维样式的增强价值,提供适合大批量商业无线通信应用的低成本层压板材料。AD系列目前可提供介电厚度(0.015“-0.062”)和介电常数(2.5-3.5)的有限组合。可以开发更厚的电介质以满足客户的要求。玻璃纤维与聚四氟乙烯树脂的重量比越高,层压板的尺寸稳定性就越高,这超出了聚四氟乙烯基基板的正常预期。聚四氟乙烯在宽频率范围和低损耗下的稳定性使AD系列材料成为各种微波和R/F应用于电信行业的理想材料。AD系列层压材料可采用标准聚四氟乙烯材料加工。因为玻璃纤维的比例相对较高,所以在各个方向上的热膨胀都减少了,从而提高了电镀通孔的可靠性。 Arlon's AD Series is a group of woven fiberglass-reinforced PTFE composite materials designed for use as printed circuit board substrates. These materials combine the excellent low loss electrical properties of PTFE resin with the enhanced value of costeffective heavier fiberglass styles to provide low cost laminate materials suitable for high volume commercial wireless communication applications. The AD Series is currently available in a limited combination of dielectric thickness (0.015" - 0.062") and dielectric constant (2.5 - 3.5). Thicker dielectrics can be developed to meet customer requirements. The higher weight ratio of fiberglass to PTFE resin yields laminates with greater dimensional stability than is normally expected of PTFE-based substrates. Stability of PTFE over a wide frequency range and low loss makes AD Series materials ideal for a variety of microwave and R/F applications in telecom industry. AD Series laminate materials may be processed with standard PTFE materials. Because there is a relatively higher percentage of fiberglass, thermal expansion is reduced in all directions, improving plated through hole reliability. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
2.40 | g/cm³ | ASTM D792-A |
吸水率 Water absorption rate |
|||
23℃,24hr 23℃,24hr |
0.070 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
ASTM D638 | ||
23℃ 23℃ 2 |
4870 | MPa | ASTM D638 |
23℃ 23℃ 3 |
3560 | MPa | ASTM D638 |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
3720 | MPa | ASTM D790 |
压缩模量 Compression modulus |
MPa | ASTM D695 | |
薄膜 film |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
ASTM D882 | ||
MD,屈服 MD, yield |
MPa | ASTM D882 | |
TD,屈服 TD, yield |
MPa | ASTM D882 | |
剥离强度 peel strength 4 |
kN/m | 内部方法 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
导热系数 Thermal conductivity coefficient |
|||
100℃ 100℃ |
W/m/K | ASTM C177 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
X Axis:0~100℃ X Axis:0~100℃ |
1/℃ | 内部方法 | |
Y Axis:0~100℃ Y Axis:0~100℃ |
1/℃ | 内部方法 | |
Z Axis:0~100℃ Z Axis:0~100℃ |
1/℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | 内部方法 | |
体积电阻率 Volume resistivity |
ohms·cm | 内部方法 | |
介电常数 Dielectric constant |
|||
23℃ 23℃ |
内部方法 | ||
耗散因数 Dissipation factor |
|||
10 GHz 10 GHz |
内部方法 | ||
耐电弧性 Arc resistance |
sec | ASTM D495 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
击穿电压 breakdown voltage |
V | ASTM D149 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 TD |
3 MD |
4 After Thermal Stress |
【新闻资讯】查看全部
塑料疾速成形技术:本钱低精度高质量好
2016-01-29 在几十年之前,还没有如今的机器模具时代,所有产品均为手工完成,极为费时,而现今各种模具盛行,制作一样产品只要刚开始制作一个模具,其他就可快速的大批量完成。 塑料快速成形技术:成本低精度高质量好 快速成形技术是近20年来制造技术的一项重大突破,但只有形成实用零件的快速制作能力,才能真正发挥其优势。因此,快速成形技术的研究重点已经由当初的工艺和设备的开发研究,逐渐转向金属模具的快速制逍12.与传统的模具制造技术相比,基于快速成形技术的快速模具制造的制作周期和制作成本都大大降低,尤其对于小批量 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |