牌号简介 About |
---|
EPO-TEK® T7110是一种双组分、导热、电绝缘环氧树脂,设计用于散热电子和半导体。它可以作为粘合剂,灌封,或封装材料,用于工业,如消费者,医疗或光学。 EPO-TEK® T7110 is a two component, thermally conductive, electrically insulating epoxy designed for heat sinking electronics and semiconductors. It may be used as an adhesive, potting, or encapsulation material, for industries such as consumer, medical or optics. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颗粒大小 Particle size |
< 50.0 | µm | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Degradation Temperature Degradation Temperature |
314 | ℃ | TGA |
Die Shear Strength(>10 kg,23℃) Die Shear Strength(>10 kg,23℃) |
23.4 | MPa | |
工作温度 working temperature |
|||
Continuous Continuous |
℃ | ||
Intermittent Intermittent |
℃ | ||
Storage Modulus(23℃) Storage Modulus(23℃) |
GPa | ||
触变指数 Thixotropic index |
|||
加热减量 Heating reduction |
|||
200℃ 200℃ |
% | ||
250℃ 250℃ |
% | ||
300℃ 300℃ |
% | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颜色 colour |
|||
-- -- 5 |
|||
-- -- 6 |
|||
密度 Density |
|||
Part B Part B |
g/cm³ | ||
Part A Part A |
g/cm³ | ||
粘度 viscosity 7 |
|||
23℃ 23℃ 7 |
Pa·s | ||
固化时间 Curing time |
|||
80℃ 80℃ |
hr | ||
储存稳定性 storage stability |
min | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
|||
搭接剪切强度 lap shear strength |
|||
23℃ 23℃ |
MPa | ||
相对电容率 Relative permittivity |
|||
1 kHz 1 kHz |
|||
体积电阻率 Volume resistivity |
|||
23℃ 23℃ |
ohms·cm | ||
耗散因数 Dissipation factor |
|||
1 kHz 1 kHz |
|||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
玻璃化转变温度 Glass transition temperature 2 |
℃ | ||
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
|||
-- -- 3 |
3.1E-5 | cm/cm/℃ | |
-- -- 4 |
1.4E-4 | cm/cm/℃ | |
导热系数 Thermal conductivity coefficient |
W/m/K | ||
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
|||
贮藏期限 Storage period |
|||
23℃ 23℃ |
wk |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Dynamic Cure 20-200°C/ISO 25 Min; Ramp -10-200°C @ 20°C/Min |
3 Below Tg |
4 Above Tg |
5 Part B |
6 Part A |
7 100 rpm |
【新闻资讯】查看全部
天津“两化”搬迁改造项目估计2019年建成
2017-01-20 耗资294亿元的天津“两化”搬迁改造项目预计2019年建成,2020年投入使用。 这是天津市人大代表、渤海化工集团有限责任公司董事长赵立志出席17日正在此间举行的天津市第十六届人大六次会议时接受记者采访时介绍的。 天津“两化”指的是天津渤海化工集团有限公司下属的天津化工厂和天津大沽化工厂。赵立志介绍说,“两化”搬迁改造项目按照安全、绿色、环保和智能化理念进行设计。“目前,项目的安评、环评和海域评价都已经结束,建设开始全面提速。部分项目已于2016年开工建设, |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |