公司信息及水印
牌号简介 About |
---|
Braskem PE SLL118 SLL118是一种线性低密度聚乙烯,丁烯-1共聚物。开发用于与聚乙烯混合的吹塑薄膜挤出。用该产品制备的薄膜具有良好的加工性能,具有良好的光学、机械性能和密封性。非常低的凝胶量。它含有抗氧化添加剂。该等级的最低生物基含量为87%,根据ASTM D6866测定。用途:拉伸薄膜;衬垫;普通用途的低密度聚乙烯和高密度聚乙烯混合物和包装。其他应用:灌溉管道的混合物。化妆品和药学应用的软容器(符合USP37)Braskem PE SLL118说明:SLL118是线性低密度聚乙烯,丁烯-1共聚物。开发用于与聚乙烯混合的吹塑薄膜挤出。用该产品制备的薄膜具有良好的加工性能,具有良好的光学、机械性能和密封性。非常低的凝胶量。它含有抗氧化添加剂。该等级的最低生物基含量为87%,根据ASTM D6866测定。用途:拉伸薄膜;衬垫;普通用途的低密度聚乙烯和高密度聚乙烯混合物和包装。其他应用:灌溉管道的混合物。 Braskem PE SLL118 SLL118 is a Linear Low Density Polyethylene that it is developed for blown film extrusion in blends with polyethylenes. Films obtained with this product show a good processing performance balanced with good optical and mechanical properties as well as sealability. Very low gel amount. It contains antioxidant additives. The minimum biobased content of this grade is 87%, determined according to ASTM D6866. Applications: Stretch films; liners; LDPE and HDPE blends and packages for general use. Others applications: blends for irrigation pipes. Flexible containers for cosmetics and pharmaceutical applications (complies with USP 37). Process: Recommended processing conditions for film extrusion about 170 - 210 °C. The optimum processing conditions will vary according to the type of equipment used and cannot be considered as performance guarantee. Braskem PE SLL118 SLL118 is a Linear Low Density Polyethylene that it is developed for blown film extrusion in blends with polyethylenes. Films obtained with this product show a good processing performance balanced with good optical and mechanical properties as well as sealability. Very low gel amount. It contains antioxidant additives. The minimum biobased content of this grade is 87%, determined according to ASTM D6866. Applications: Stretch films; liners; LDPE and HDPE blends and packages for general use. Others applications: blends for irrigation pipes. Flexible containers for cosmetics and pharmaceutical applications (complies with USP 37). Process: Recommended processing conditions for film extrusion about 170 - 210 °C. The optimum processing conditions will vary according to the type of equipment used and cannot be considered as performance guarantee. Braskem PE SLL118 SLL118 is a Linear Low Density Polyethylene that it is developed for blown film extrusion in blends with polyethylenes. Films obtained with this product show a good processing performance balanced with good optical and mechanical properties as well as sealability. Very low gel amount. It contains antioxidant additives. The minimum biobased content of this grade is 87%, determined according to ASTM D6866. Applications: Stretch films; liners; LDPE and HDPE blends and packages for general use. Others applications: blends for irrigation pipes. Flexible containers for cosmetics and pharmaceutical applications (complies with USP 37). Process: Recommended processing conditions for film extrusion about 170 - 210 °C. The optimum processing conditions will vary according to the type of equipment used and cannot be considered as performance guarantee. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.916 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
1.0 | g/10min | ASTM D1238 |
Biobased Content Biobased Content |
87 | % | ASTM D6866 |
薄膜 film |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
TD,断裂,38 µm,吹塑薄膜 TD, fracture, 38 µ m, blow molded film |
40.0 | MPa | ASTM D882 |
MD,断裂,38 µm,吹塑薄膜 MD, fracture, 38 µ m, blow molded film |
50.0 | MPa | ASTM D882 |
拉伸应变 Tensile strain |
|||
TD,断裂,38 µm,吹塑薄膜 TD, fracture, 38 µ m, blow molded film |
% | ASTM D882 | |
MD,断裂,38 µm,吹塑薄膜 MD, fracture, 38 µ m, blow molded film |
% | ASTM D882 | |
弯曲模量 Bending modulus |
|||
1% 正割,TD,38 µm,吹塑薄膜 1% secant, TD, 38 µ m, blow molded film |
MPa | ASTM D790 | |
1% 正割,MD,38 µm,吹塑薄膜 1% secant, MD, 38 µ m, blow molded film |
MPa | ASTM D790 | |
落锤冲击 Drop hammer impact |
|||
38 µm,吹塑薄膜 38 µ m, blow molded film |
g | ASTM D1709 | |
埃尔曼多夫抗撕强度 Elmandorf tear strength |
|||
TD,38 µm,吹塑薄膜 TD, 38 µ m, blow molded film |
g | ASTM D1922 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 F50 |
【新闻资讯】查看全部
如何给孩子挑选塑料制品
2019-01-30 很多家长在给孩子买杯子碗筷时,如果是塑料制品,就会格外小心,害怕买不好对身体有害,那我们究竟怎么挑选塑料制品呢?每个塑料制品都有身份证一个由三个箭头组成的三角形, |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |