牌号简介 About |
---|
德林是一种结晶塑料,它提供了一个良好的平衡性能,弥合金属和塑料之间的差距。Delrin具有很高的拉伸强度、抗蠕变和韧性。它还表现出低吸湿性。它对碳氢化合物、溶剂和中性化学物质具有化学抗性。这些特性及其疲劳耐久性使德尔林非常适合许多工业应用。Ensinger使用杜邦的Delrin 150系列缩醛树脂制造均聚缩醛原料形状。这是一种结晶塑料,它提供了一个良好的平衡性能,以填补金属和塑料之间的差距。它具有较高的拉伸和弯曲性能,同时具有抗蠕变和韧性,同时具有较低的吸湿性和疲劳耐久性。良好的尺寸稳定性、低吸湿性、优良的机械加工性、高疲劳耐久性、高强度和刚度性能、优异的抗冲击和抗蠕变性能、耐燃料和溶剂化学腐蚀性、天然级树脂,符合FDA、NSF和USDA的要求,具有良好的磨损和磨损性能。 DELRIN® is a crystalline plastic which offers an excellent balance of properties that bridge the gap between metals and plastics. DELRIN® possesses high tensile strength, creep resistance and toughness. It also exhibits low moisture absorption. It is chemically resistant to hydrocarbons, solvents and neutral chemicals. These properties along with its fatigue endurance make DELRIN® ideal for many industrial applications. Ensinger manufactures homopolymer acetal stock shapes using DuPont's Delrin® 150 series acetal resin. It is a crystalline plastic which offers an excellent balance of properties to bridge the gap between metals and plastics. It possesses high tensile and flexural properties, along with creep resistance and toughness, while exhibiting low moisture absorption, and fatigue endurance. Good dimensional stability Low moisture absorption Excellent machinability High fatigue endurance High strength and stiffness properties Superior impact and creep resistance Chemical resistance to fuels and solvents Natural grade is made from resin that is FDA, NSF and USDA compliant Good wear and abrasion properties |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.41 | g/cm³ | ASTM D792 |
吸水率 Water absorption rate |
|||
23℃,24hr 23℃,24hr |
0.25 | % | |
饱和 saturated |
0.90 | % | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
80 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
169 | ℃ | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ||
熔融温度 Melting temperature |
℃ | ||
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
比热 specific heat |
J/kg/℃ | ASTM C351 | |
使用温度 Operating temperature |
|||
Intermittent Intermittent |
℃ | ||
长期 long-term |
℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant 3 |
|||
23 ℃,60 Hz 23 ℃,60 Hz 3 |
ASTM D150 | ||
耗散因数 Dissipation factor |
|||
60 Hz 60 Hz |
ASTM D150 | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
M 级 M-level |
ASTM D785 | ||
拉伸模量 Tensile modulus |
|||
23℃ 23℃ |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
|||
屈服,23℃ Yield, 23 ℃ |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
摩擦系数 friction coefficient 2 |
|||
动态 dynamic 2 |
ASTM D1894 | ||
磨损因数 Wear factor |
10^-8 mm³/N·m | ASTM D3702 |
备注 |
---|
2. 40 PSI, 50 FPM |
3. 50% RH |
【新闻资讯】查看全部
3D打印医疗器械市场将迎来“井喷”
2017-02-17 随着3D打印在医疗行业的应用越来越广泛,全球医疗行业正在发生巨大的变革。与此同时,全球两大知名市场研究公司发布的公告均认为3D打印医疗器械市场的发展将迎来“井喷”。 医学的发展,从来都离不开创新,而医学的创新,来自病人的需求。3D打印技术的应用无疑是中国医学实现从追随到超越的难得机遇。尽管目前为止生物3D打印技术能够打印出的产品还远没有发展到可以替代人源器官的程度,但是人们在这项飞速发展的技术中,看到的是巨大的希望。 据了解,FutureMarketInsi |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |