牌号简介 About |
---|
过氧化物固体硅橡胶绝缘材料产品说明本产品为单组分固体硅橡胶,适用于冷收缩电缆附件的压缩成型或挤出成型,由过氧化物催化,SSR1502-40和SSR1502-45为压缩成型,SSR1503-40为挤出成型,具有优异的抗老化性和WEA性能。耐高温、高回弹、低张力设定、高撕裂强度、高延伸率、优异的热稳定性和冷稳定性(-60°C至250°C)优异的电绝缘性能,应用于中高压耐高温绝缘子。冷缩电缆附件(端子、连接器、套管)、避雷器等。 Peroxid solid silicone material for insulators Product description This product is one component solid silicone rubber, suitable for making cold shrink cable accessory by compression molding or extrusion molding, catalyzed by peroxid, SSR1502-40 and SSR1502-45 are compression molding, SSR1503-40 is extrusion molding Outstanding anti-ageing and weathering resistance High rebound and low tension set High tear strength High elongation Excellent thermal and cold stability (-60°C to 250°C) Excellent electric insulating property Applications Medium and high voltage resistant insulator. Cold shrink cable accessories (terminals, connectors and bushing) lightning arrester etc. |
技术参数 Technical Data | |||
---|---|---|---|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
45 | ASTM D2240 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸永久变形 Tensile permanent deformation 2 |
ASTM D412 | ||
-- -- |
3 | % | ASTM D412 |
300% 应变,120℃ 300% strain, 120 ℃ 3 |
10 | % | ASTM D412 |
拉伸强度 tensile strength |
10.1 | MPa | ASTM D412 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
850 | % | ASTM D412 |
撕裂强度 tear strength 4 |
kN/m | ASTM D624 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | IEC 60093 | |
介电强度 Dielectric strength |
kV/mm | IEC 60243-1 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
贮藏期限 Storage period |
wk | ||
后固化时间 Post curing time |
|||
200℃ 200℃ |
hr | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
固化时间 Curing time |
|||
140℃ 140℃ |
hr |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 C 模具 |
3 48hrs |
4 B 模具 |
【新闻资讯】查看全部
日本东丽碳纤维将用于汽车中心部件
2017-02-27 日本东丽将凭借全球市场份额居首的碳纤维全面开拓汽车市场。东丽计划在爱媛县新建日本首座面向燃料电池的部材生产工厂,计划2018年投入运转。还将量产与安全息息相关的汽车用碳纤维骨架部件。东丽今后3年计划向碳纤维领域投资史上最大规模的1千多亿日元,其中200亿日元以上将用于汽车领域。继飞机和发电用风车之后,碳纤维的用途还将扩大到有望进行量产的汽车核心部材领域。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |