牌号简介 About |
---|
ADMER™ NF358E是一种马来酸酐接枝的、基于PE-LD的TIE树脂,开发用于由PE、PA、EVOH或铝组成的多层F'lm应用。该等级可与PE-LD、PE-LLD、PE-L-LD和EVA混合使用。LTS具有优异的附着性能和高透明度,是多层阻隔膜的理想选择。采用我公司先进的酸酐接枝技术,该牌号的未反应酸含量很低,同时保持了普通PE-LLD的等效热稳定性。NF358E的粘合强度可以通过在20%到40%的混合比范围内改变来调节。 ADMER™ NF358E is a maleic anhydride grafted, PE-LLD-based tie resin developed for multilayer film applications composed of PE, PA, EVOH or Aluminum. This grade can be blended with PE-LD, PE-LLD, PE-HD and EVA. Its superior adhesion performance and high transparency makes it the perfect choice for multilayer barrier films. Incorporating our advanced anhydride grafting technology, this grade has very low unreacted acid content, while maintaining the equivalent thermal stability of ordinary PE-LLD. The adhesion strength of NF358E can be adjusted by changing of the blend ratio in the range of 20% to 40%. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.910 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
1.6 | g/10min | ASTM D1238 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
|||
|
82 | ℃ | ASTM D1525 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
NB | J/m | ASTM D256 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
44 | ASTM D2240 | |
拉伸强度 tensile strength |
|||
23℃ 23℃ |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
PIMA扩大了聚异氰尿酸盐的认证计划
2022-08-02 聚异氰尿酸盐绝缘制造商协会(PIMA)扩大了其针对加拿大和美国聚异氰脲酸酯(polyiso)屋顶绝缘制造商的自愿性QualityMark认证计划。该计划使参与者能够获得独立于生产现场选择的隔热 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |