牌号简介 About |
---|
Derakane 411-45环氧乙烯基酯树脂以双酚A环氧树脂为基础,由于其广泛的最终用途和广泛的制造技术应用能力,已成为“行业标准”。制造该树脂所用的原材料在FDA法规标题21 CFR 177.2420中列为可接受的,用于与食品接触的重复使用,但使用者必须遵守该法规的规定限制。Derakane 411-45树脂的用途和用途是为玻璃钢储槽、容器、管道和现场维护项目的制造而设计的,适用于化学加工和纸浆和造纸操作。DelaKAN411-45树脂被设计用于使用手工铺层、喷涂、纤维缠绕、压缩模塑和树脂转移成型技术、拉挤成型和模制光栅应用的制造。Derakane 411-45树脂在整个工作温度范围内表现出优异的机械性能,非常高的抗破坏性,可降低至-50°C(-58°F)。 DERAKANE 411-45 epoxy vinyl ester resin is based on bisphenol-A epoxy resin and has become an "industry standard" due to its wide range of end-use applications and ability to be used in a wide range of fabrication techniques. The raw materials used in the manufacture of this resin are listed as acceptable in FDA regulation Title 21 CFR 177.2420 for repeated use in contact with food, subject to user's compliance with the prescribed limitations of that regulation. APPLICATIONS AND USE DERAKANE 411-45 resin is designed for use in fabricating FRP storage tanks, vessels, ducts and on-site maintenance projects, paticularly in chemical processing and pulp and paper operations. DERAKANE 411-45 resin is designed for ease of fabrication using hand lay-up, spray-up, filament winding, compression molding and resin transfer molding techniques, pultrusion and molded grating applications. DERAKANE 411-45 resin exhibits excellent mechanical properties over an entire service temperature range, very high damage resistance, down to -50°C (-58°F). |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.12 | g/cm³ | ISO 1183 |
溶液粘度 Solution viscosity |
495 | mPa·s | |
苯乙烯含量 styrene content |
45 | % | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
102 | ℃ | ASTM D648,ISO 75-2/A |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积收缩 Volume contraction |
8.3 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
巴氏硬度 Babbitt hardness |
ASTM D2583 | ||
拉伸模量 Tensile modulus |
|||
-- -- |
MPa | ASTM D638 | |
-- -- |
MPa | ISO 527-2 | |
拉伸强度 tensile strength |
|||
-- -- |
MPa | ASTM D638 | |
-- -- |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
屈服 yield |
% | ASTM D638 , ISO 527-2 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 , ISO 178 | |
弯曲强度 bending strength |
MPa | ASTM D790,ISO 178 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
南通市取缔三无企业 进行废塑料专项整治
2021-03-28 搜料网资讯: 据记者了解,从3月1日起至4月25日,南通市环保局将集中力量大力整治废旧塑料加工行业,旨在改善区域水环境和大气环境质量,有效消除群众投诉的热点环境问题。 南通 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |