牌号简介 About |
---|
Tecapei是一种无定形热塑性聚醚酰亚胺(PEI),由SABIC Innovative Plastics的Ultem 1000和2000系列树脂制成。无筋1000系列材料是半透明的琥珀色,结合了特殊的机械、热和电气性能。2000系列玻璃纤维增强材料的加入,加上Ensinger专有的挤压技术,使Tecapei具有更高的拉伸强度和刚度,同时提高了尺寸稳定性。Tecapei在医疗、电子/电气、微波炉、汽车和飞机行业有许多应用。 TECAPEI™ is an amorphous thermoplastic polyetherimide (PEI) made from Sabic Innovative Plastics' Ultem® 1000 and 2000 series resins. The unreinforced 1000 series materials are translucent amber in color, and combine exceptional mechanical, thermal, and electrical properties. The addition of glass fiber reinforcement in the 2000 series, coupled with Ensinger's proprietary extrusion techniques, provides the TECAPEI™ with both greater tensile strength and rigidity, while also improving dimensional stability. TECAPEI has many applications in medical, electronic/electrical, microwave, automotive, and aircraft industries. Excellent mechanical strength Outstanding heat resistance Exceptional resistance to environmental forces Inherent flame resistance with low smoke evolution High mechanical strength High dielectric strength Low dissipation factor over a wide range of frequencies Excellent machinability and finishing characteristics |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.51 | g/cm³ | ASTM D792 |
吸水率 Water absorption rate |
ASTM D570 | ||
23℃,24hr 23℃,24hr |
0.16 | % | ASTM D570 |
平衡,23℃ Equilibrium, 23 ℃ |
0.90 | % | ASTM D570 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
59 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,未退火,6.10 mm,注塑 0.45 MPa, unannealed, 6.10 mm, injection molded |
212 | ℃ | ASTM D648 |
1.8 MPa,未退火,6.35 mm 1.8 MPa, unannealed, 6.35 mm |
℃ | ASTM D648 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
导热系数 Thermal conductivity coefficient 2 |
W/m/K | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity 2 |
|||
1.59 mm 1.59 mm 2 |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength 2 |
ASTM D149 | ||
在空气中 In the air |
kV/mm | ASTM D149 | |
在油中 In oil |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant 3 |
|||
1 kHz 1 kHz 3 |
ASTM D150 | ||
耗散因数 Dissipation factor 3 |
|||
23℃,1 kHz 23℃,1 kHz 3 |
ASTM D150 | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
内部方法 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
M 级 M-level |
ASTM D785 | ||
拉伸模量 Tensile modulus |
|||
23℃ 23℃ |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
|||
断裂,23℃ Fracture, 23 ℃ |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
压缩强度 compressive strength |
MPa | ASTM D695 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Injection Molded |
3 50% RH, Injection Molded |
【新闻资讯】查看全部
沙特阿美提高2022资本支出
2022-04-03 3月20日,沙特阿美公司表示,在2021年石油产量没有变化情况下,该公司将在2022年提高其资本支出水平至400亿~500亿美元。 沙特阿美首席执行官阿明纳赛尔在声明中表示:我们的投资计划 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |