牌号简介 About |
---|
硬化剂可能在氧气作用下发生轻微的分解。氧气分解硬化剂K 25为红棕色,不影响产品质量。可以在室温(20°C)下拆除层压板。零件的强度很好。为了达到最大的性能值,例如抗弯强度和耐热性,我们建议在推荐温度下进行热处理。应用造船手工层压性能良好室温固化性能优异芳纶纤维布浸水性能优异玻璃纤维布浸水性能优异碳纤维布浸水性能低粘度认证依据“德国劳埃德” Slight discoleration of the hardener by oxygen possible. Discoleration to red-brown of hardener K 25 by oxygen, which doesn't affect the products quality. Demoulding of laminates made at room temperature (20°C) is possible. The parts show very good strength. To achieve maximum property values for example for flexural strength and heat resistance, we recommend thermal treatment at the recommended temperature. Applications Boatbuilding Hand laminating Properties good curing at room temperature excellent soaking of aramid fibre cloth excellent soaking of glass fibre cloth excellent soaking of carbon fibre cloth low viscosity certified according to "Germanischer Lloyd" |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
吸水率 Water absorption rate |
DIN 53495 | ||
23℃,24hr 23℃,24hr |
0.12 | % | DIN 53495 |
饱和,23℃ Saturation, 23 ℃ 2 |
0.29 | % | DIN 53495 |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
20℃ 20℃ |
1.11 到 1.15 | g/cm³ | |
粘度 viscosity |
|||
25℃ 25℃ |
0.45 到 0.85 | Pa·s | |
固化时间 Curing time |
|||
20℃ 20℃ |
8.0 到 10 | hr | |
储存稳定性 storage stability |
|||
20 ℃ 20 ℃ 3 |
min | ||
20 ℃ 20 ℃ 4 |
min | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ISO 7619 | ||
拉伸模量 Tensile modulus |
MPa | ISO 527-2 | |
拉伸强度 tensile strength |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2 | |
弯曲模量 Bending modulus |
MPa | ISO 178 | |
弯曲强度 bending strength |
MPa | ISO 178 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
玻璃化转变温度 Glass transition temperature |
℃ | TMA | |
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
|||
后固化时间 Post curing time |
|||
80℃ 80℃ |
hr |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 168 h |
3 200 g |
4 100 g |
【新闻资讯】查看全部
PLA产能爆发!今年新增13.5万吨,亟须下一个风口级应用
2023-06-05 扫描上图二维码,可以免费下载 搜料 APP 目前,我国聚乳酸(PLA)老牌的聚合厂家主要有安徽丰原生物(10万吨+30万吨),浙江海正生材(4.5万吨+2万吨+15万吨),吉林中粮生物(1万吨 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |