牌号简介 About |
---|
EBA Alcudia PA-1240是一种适用于一般挤出、注塑和需要良好加工性、柔韧性和良好机械性能的化合物的共聚物。丙烯酸丁酯含量为12%。它含有抗氧化添加剂。典型应用挤出(型材、片材)注射成型微孔泡沫化合物和母料建议的熔融温度180°C。EBA共聚物具有良好的热稳定性,可在需要时提高加工温度。PA-1240的加工特性与低密度聚乙烯相似,推荐使用传统的聚乙烯挤出机。各生产线的加工条件应得到优化。 EBA ALCUDIA® PA-1240 is a copolymer suitable for general extrusion, injection moulding and compounds where good processability, flexibility and very good mechanical properties are required. The butyl acrylate content is 12%. It contains antioxidant additives. TYPICAL APPLICATIONS Extrusion (profiles, sheets) Injection moulding Microcellular foams Compounds and masterbatches Recommended melt temperature 180°C. EBA copolymers exhibit excellent thermal stability, which allows higher processing temperatures if needed. Processing characteristics of PA-1240 are similar to LDPE and conventional polyethylene extruders are recommended. Processing conditions should be optimised for each production line. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.925 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
4.0 | g/10min | ISO 1133 |
丁酯丙烯酸成分 Butyl acrylate composition |
12.0 | wt% | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
73.0 | ℃ | ISO 306/A |
熔融温度 Melting temperature |
100 | ℃ | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
|||
邵氏 D Shaw's D |
|||
拉伸强度 tensile strength |
|||
断裂 fracture |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2 |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部
全国109家处置企业处置废弃电器电子产品约7900多万台
2018-10-17 关于电子电器塑料循环发展论坛的通知 各会员单位: 塑料在不同家用电器中所占的比重不同,在电冰箱和洗衣机中所占比例为40%左右,在电视机中约占23%,在空调器中约占11%。家用电器中含有的塑料种类很多,主要为热塑性塑料,PP、PS、PC、ABS、PVC 等最为常见,同时也含有部分热固性塑料,如PU。 2017年,全国109家处理企业处理废弃电器电子产品约7900多万台。 经验证明,在电子电器设计初期就将塑料循环和再 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |