牌号简介 About |
---|
GM5010T2是一种高摩尔质量的高密度聚乙烯混合物,专门为制造挤压管而开发。该树脂采用双峰技术生产,除具有优异的抗应力开裂性能外,还具有优良的力学性能。根据ISO 9080,该树脂的MRS(最低要求强度)为8 MPa,根据ISO 12162,该树脂被归类为PE 80。GM 5010 T2含有碳黑颜料,可保证抗光降解。 GM5010T2 is a High Density Polyethylene compound specially developed for the manufacturing of extruded pipes. It is produced with bimodal technology and has high molar mass. It shows high mechanical properties and has excellent resistance to hydrostatic pressure and to stress cracking. This resin has MRS (Minimum Required Strength) of 8 MPa, according to ISO 9080, and is classified as PE 80, according to ISO 12162. GM5010T2 contains carbon black pigment that protects it against ultraviolet radiation action and photodegradation. Meets the requirements of NBR 15561:07 and ISO 4427:07. Application: Black PE 80 pressure pipes for water distribution, underwater emissaries and pressurized sewer systems; self-propelled irrigation pipes; jacketing of umbilical cables; risers and flowlines for oil filed platforms; pipes for mining. Process: Extrusion. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.955 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,5.0kg 190℃,5.0kg |
0.45 | g/10min | ASTM D1238 |
抗环境应力开裂 ESCR(Environmental Stress Cracking Resistance) |
|||
50 ℃,2.00 mm,100%非离子表面活性剂,模压成型,F50 50 ℃, 2.00 mm, 100% non-ionic surfactant, molded, F50 |
> 1000 | hr | ASTM D1693 |
炭黑含量 Carbon black content |
2.0 to 2.5 | % | ASTM D1603 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,模压成型 Shaw's D, molded |
62 | ASTM D2240 | |
拉伸强度 tensile strength |
|||
断裂,模压成型 Fracture, molded |
MPa | ASTM D638 | |
屈服,模压成型 Yield, molding |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂,模压成型 Fracture, molded |
% | ASTM D638 | |
屈服,模压成型 Yield, molding |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
1% 正割,模压成型 1% cut, molded |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
模压成型 Compression Molding |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火,模压成型 0.45 MPa, unannealed, molded |
℃ | ASTM D648 | |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 2 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 压 力1 (10N) |
【新闻资讯】查看全部
江阴美源相聚2016上海胶粘带、维护膜及光学膜展览会
2016-03-30 江阴美源实业有限公司成立于1988年,一直专心致力于暖通空调/制冷专用胶带、优质复合绝热贴面、双面反射绝热铝箔、双面胶带、压敏胶粘剂的研发、生产与销售。公司地处中国经济最发达的长三角地区中心�D�D幸福江阴,北携长江、南接上海,水陆交通便利。 历经多年的积累和发展,公司营销网络遍布全国,打造出“美源”、“汇泉”、“汇昌”等知名品牌。每年的销售业绩稳步递增,是中国胶带行业的龙头企业。公司的外销业务也同样名声斐然,产品已远销北美、欧洲、南美和东南亚等地区。 日前 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |