牌号简介 About |
---|
Kraton G1643 M是一种基于苯乙烯和乙烯/丁烯的透明线性三嵌段共聚物,聚苯乙烯含量为20%。它由北美提供,其物理形式如下所示。Kraton G1643 MS-是一种粉末状致密颗粒。Kraton G1643 M用于化合物配方和热塑性塑料的改性剂。它也可用于配制粘合剂、密封剂、涂料和改性沥青。 Kraton G1643 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 20%. It is supplied from North America in the physical form identified below. Kraton G1643 MS - is supplied as a dusted, dense pellet. Kraton G1643 M is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
14 到 25 | g/10min | ASTM D1238 |
Antioxidant Additive Antioxidant Additive 2 |
0.060 到 0.14 | % | 内部方法 |
聚苯乙烯含量 Polystyrene content |
17 到 21 | % | 内部方法 |
Total Extractables Total Extractables |
< 1.0 | % | 内部方法 |
灰份含量 Ash Content |
|||
S,二氧化硅 S. Silicon dioxide |
% | 内部方法 | |
挥发物 Volatiles |
% | 内部方法 | |
溶液粘度 Solution viscosity |
|||
25wt%甲苯,25℃ 25wt% toluene, 25 ℃ |
mPa·s | 内部方法 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A,30 秒 Shore A, 30 seconds |
ASTM D2240 | ||
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ASTM D412 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D412 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Styrene/Rubber ratio Styrene/Rubber ratio |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Non-staining phenolic antioxidant |
【新闻资讯】查看全部
巴斯夫对欧盟计划中对化工厂征收“过高”的排放税提出警告
2021-07-15 搜料网资讯: 14日,巴斯夫对欧盟的Fit for 55方案表示欢迎,该方案的目标是到2030年在1990年的水平上再减少55%的排放量,但警告说对化工厂的碳排放过度征税可能危及该行业的全球竞争 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |