公司信息及水印
| 牌号简介 About |
|---|
| POM共聚物极易流动的注射成型类型,适用于具有不利流动路径壁厚关系的非常薄壁的精密成型零件;允许在较低温度和较短循环时间下加工;对于机械要求较低;对溶剂、燃料和强碱具有良好的耐化学性,以及良好的水解作用。抵抗力;对热降解和氧化降解的高抵抗力。与紫外线添加剂的应用范围:非常薄的精密注塑件与不利的流道壁厚关系;允许在降低的温度下加工,也缩短了循环时间。 POM copolymer Extremely easy flowing Injection molding type for very thin-walled precision molded parts with unfavourite flow-path-wall thickness relation; permits processing at reduced temperature and also shorter cycle times; for mechanical lower requirements; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high esistance to thermal and oxidative degradation. With UV Additives Ranges of applications: For very thin-walled precision molded parts with unfavourite flow-path-wall thickness relation; permits processing at reduced temperature and also shorter cycle times. |
| 技术参数 Technical Data | |||
|---|---|---|---|
|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
拉伸模量 Tensile modulus |
3000 | MPa | ISO 527-2/1A/1 |
|
拉伸强度 tensile strength |
|||
|
屈服 yield |
65.0 | MPa | ISO 527-2/1A/50 |
|
拉伸应变 Tensile strain |
|||
|
屈服 yield |
7.0 | % | ISO 527-2/1A/50 |
|
标称拉伸断裂应变 Nominal tensile fracture strain |
注册或登录后
所有资料免费
|
% | ISO 527-2/1A/50 |
|
Tensile Creep Modulus(1 hr) Tensile Creep Modulus(1 hr) |
注册或登录后
所有资料免费
|
MPa | ISO 899-1 |
|
拉伸蠕变模量 Tensile creep modulus |
注册或登录后
所有资料免费
|
||
|
1000 hr 1000 hr |
注册或登录后
所有资料免费
|
MPa | ISO 899-1 |
|
弯曲模量 Flexural Modulus |
注册或登录后
所有资料免费
|
||
|
23℃ 23℃ |
注册或登录后
所有资料免费
|
MPa | ISO 178 |
|
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
简支梁缺口冲击强度 Charpy Notched Impact Strength |
注册或登录后
所有资料免费
|
ISO 179/1eA | |
|
-30℃ -30℃ |
注册或登录后
所有资料免费
|
kJ/m² | ISO 179/1eA |
|
23℃ 23℃ |
注册或登录后
所有资料免费
|
kJ/m² | ISO 179/1eA |
|
简支梁无缺口冲击强度 Charpy Unnotched Impact strength |
注册或登录后
所有资料免费
|
ISO 179/1eU | |
|
-30℃ -30℃ |
注册或登录后
所有资料免费
|
kJ/m² | ISO 179/1eU |
|
23℃ 23℃ |
注册或登录后
所有资料免费
|
kJ/m² | ISO 179/1eU |
|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
热变形温度 HDT |
注册或登录后
所有资料免费
|
||
|
1.8 MPa,未退火 1.8 MPa, unannealed |
注册或登录后
所有资料免费
|
℃ | ISO 75-2/A |
|
熔融温度 Melting temperature |
注册或登录后
所有资料免费
|
℃ | ISO 11357-3 |
|
线性热膨胀系数 Coeff.of linear therm expansion |
注册或登录后
所有资料免费
|
||
|
MD MD |
注册或登录后
所有资料免费
|
1/℃ | ISO 11359-2 |
|
电气性能 ELECTRICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
表面电阻率 Surface resistivity |
注册或登录后
所有资料免费
|
ohms | IEC 60093 |
|
体积电阻率 Volume resistivity |
注册或登录后
所有资料免费
|
ohms·cm | IEC 60093 |
|
介电强度 Dielectric strength |
注册或登录后
所有资料免费
|
kV/mm | IEC 60243-1 |
|
相对电容率 Relative permittivity |
注册或登录后
所有资料免费
|
IEC 60250 | |
|
100 Hz 100 Hz |
注册或登录后
所有资料免费
|
IEC 60250 | |
|
1 MHz 1 MHz |
注册或登录后
所有资料免费
|
IEC 60250 | |
|
耗散因数 Dissipation factor |
注册或登录后
所有资料免费
|
IEC 60250 | |
|
100 Hz 100 Hz |
注册或登录后
所有资料免费
|
IEC 60250 | |
|
1 MHz 1 MHz |
注册或登录后
所有资料免费
|
IEC 60250 | |
|
相比漏电起痕指数 Comparative Tracking Index |
注册或登录后
所有资料免费
|
V | IEC 60112 |
|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
密度 Density |
注册或登录后
所有资料免费
|
g/cm³ | ISO 1183 |
|
熔体体积流动速率 Melt Volume Rate |
注册或登录后
所有资料免费
|
||
|
190℃,2.16 kg 190℃,2.16 kg |
注册或登录后
所有资料免费
|
cm³/10min | ISO 1133 |
|
收缩率 Shrinkage |
注册或登录后
所有资料免费
|
ISO 294-4 | |
|
TD TD |
注册或登录后
所有资料免费
|
% | ISO 294-4 |
|
MD MD |
注册或登录后
所有资料免费
|
% | ISO 294-4 |
|
吸水率 Water Absorption |
注册或登录后
所有资料免费
|
||
|
饱和,23℃ Saturation, 23 ℃ |
注册或登录后
所有资料免费
|
% | ISO 62 |
|
熔体密度 Melt density |
注册或登录后
所有资料免费
|
g/cm³ | |
|
Melt Specific Heat Melt Specific Heat |
注册或登录后
所有资料免费
|
J/kg/℃ | |
|
熔体导热性 Melt thermal conductivity |
注册或登录后
所有资料免费
|
W/m/K | |
|
顶出温度 Ejection temperature |
注册或登录后
所有资料免费
|
℃ | |
| 备注 |
|---|
| 1 一般属性:这些不能被视为规格。 |
| 2 10°C/min |
|
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |















支付宝
微信支付