牌号简介 About |
---|
氟化物颗粒粉末(铸模粉末)用于生产板材、棒材、钢坯和其他一般铸模。填充化合物在另一页中描述。用途:大钢坯(高300-1500mm)板料成型。饲料。特性:细颗粒粉末。高拉伸强度,表面光洁度好。G190和G192的体积密度更高。 Fluon®PTFE granular powders (moulding powders) are used for the production of sheets, rods, billets and other general mouldings. Filled compounds are described in other page. Applications: large billet(300-1,500mm height) sheet moulding. feed stock. Characteristics: fine particle powders. high tensile strength excellent surface finish. higher bulk density for G190 and G192. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表观密度 Apparent density |
0.44 | g/cm³ | JIS K6891 |
收缩率 Shrinkage rate |
4.3 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
42.0 | MPa | JIS K6891 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
370 | % | JIS K6891 |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
平均粒径 Average particle size |
25.0 | µm | ASTM D1457 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
三菱化学先进材料推热塑性材料扩展产品线 满足汽车等市场的需求
2021-02-02 搜料网资讯: 据外媒报道,三菱化学先进材料(Mitsubishi Chemical Advanced Materials,MCAM)公司宣布推出KyronMAX结构性热塑性材料扩展产品线,采用了新型树脂配方,以满足医疗、石油天然气 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |