牌号简介 About |
---|
Versaflex™ HC MT555 是一种容易加工的材料,设计用于需要符合 FDA 标准和医疗检测的应用。 着色性极佳 手感柔软 Versaflex™ HC MT555 is an easy processing material designed for applications where FDA compliance and medical testing is required. Excellent Colorability Soft Touch |
技术参数 Technical Data | |||
---|---|---|---|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A,10 秒 Shore A, 10 seconds |
54 | ASTM D2240 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 4 , 5 |
ASTM D412 | ||
断裂,23℃ Fracture, 23 ℃ 4 , 5 |
6.38 | MPa | ASTM D412 |
100% 应变,23℃ 100% strain, 23 ℃ |
1.74 | MPa | ASTM D412 |
300% 应变,23℃ 300% Strain, 73°F |
3.31 | MPa | ASTM D412 |
拉伸应变 Tensile strain 4 , 5 |
|||
断裂,23℃ Fracture, 23 ℃ 4 , 5 |
630 | % | ASTM D412 |
压缩形变 Compression deformation |
|||
23℃,22 hr 23℃,22 hr |
% | ASTM D395B | |
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
g/cm³ | ASTM D792 | |
收缩率 Shrinkage rate |
|||
MD MD |
% | ASTM D955 | |
熔体表观粘度 Apparent viscosity of melt |
ASTM D3835 | ||
200℃,1340 sec^-1 200℃,1340 sec^-1 |
Pa·s | ASTM D3835 | |
200℃,11200 sec^-1 200℃,11200 sec^-1 |
Pa·s | ASTM D3835 |
备注 |
---|
1 Please contact GLS Thermoplastic Elastomers for the specific FDA compliance letter on this product. |
2 Please contact PolyOne GLS Thermoplastic Elastomers for a complete copy of the GLS Healthcare Policy. 1. The Customer must notify GLS of any FDA Class I and/or European Union Class I medical devices for each specific product and application. 2. The Customer shall not knowingly manufacture, use, sell or otherwise supply, directly or indirectly products or compounds made from GLS products in any of the following without prior written approval by GLS for each specific product or application: a. Cosmetics b. Drugs and other Pharmaceuticals c. Temporary or permanent implantation in the human body, regardless of the intended duration of implantation d. Class II and Class III Medical Devices as defined in 21 CFR 860.3 ("Medical Devices") e. Class IIa, IIb and III as defined in Directive 93/42/EEC |
3 一般属性:这些不能被视为规格。 |
4 C 模具 |
5 2 小时 |
【新闻资讯】查看全部
沙特阿美敲定最终投资决定:将在中国开发大型炼化一体化项目
2022-03-13 沙特阿美3月10日宣布,已作出最终投资决定,将参与东北地区大型炼油化工一体化联合装置的开发。 沙特阿美与中国兵器工业集团、辽宁盘锦鑫诚集团于2019年12月共同设立华锦阿美石油 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |