牌号简介 About |
---|
Durez® 31513是一种一步法(可吸收)的热固性酚醛树脂,溶解于MEK中。Durez® 31513推荐用于丁腈橡胶溶剂粘合剂。每100份橡胶使用30至75份树脂,取决于胶膜所需的强化程度、硬度或柔韧性。树脂的处理比标准固体树脂容易得多,因为添加额外的溶剂非常容易。强键发生在溶剂被清除后,随着时间的推移,它们变得更加强大。如果提高耐热性是一个因素,建议固化温度为120°C或更高。在许多应用中,室温固化就足够了。基于Durez® 31513的水泥具有多种用途,如金属对金属的粘合、金属橡胶粘合系统、制动衬片粘合系统、制动蹄片制造和通用粘合剂。 Durez® 31513 is a thermosetting phenol formaldehyde resin of the one-step type ( resole ), dissolved in MEK. Durez® 31513 is recommended for use in nitrile rubber solvent cements. 30 to 75 parts of resin per 100 parts of rubber are used depending on the degree of reinforcement, hardness or flexibility required in the adhesive film. Handling of the resin is much easier than standard solid resin because additional solvent can be added very easily. Strong bonds occur after the solvent has been eliminated and as they age, they become even stronger. Where increased heat resistance is a factor, cure temperatures of 120°C and higher are recommended. In many applications curing at room temperature is sufficient. Cements based on Durez® 31513 have a variety of uses, such as metal to metal adhesion, metal-rubber bonding systems, brake lining bonding systems, shoe manufacturing and general adhesives. |
技术参数 Technical Data | |||
---|---|---|---|
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
固体含量 Solid content 2 |
69 | % | 内部方法 |
粘度 viscosity |
|||
25℃ 25℃ |
0.90 | Pa·s | 内部方法 |
固化时间 Curing time |
|||
165℃ 165℃ |
0.015 | hr | 内部方法 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 105°C, 0.75g, 1h |
【新闻资讯】查看全部
台湾从源头开始添加使用塑料
2018-09-26 据台湾《联合报》报道,台湾“环保署”检测自来水净水场、养殖区、海水浴场的自来水、海水、沙滩砂砾及贝类,证实大部分样品均检出塑料微粒。环保团体表示,这代表塑料使用太过泛滥,除了检讨台湾相关回收机制外,更应该从源头开始减少使用塑料,否则,进入食物链中,伤害的还是人类自己。 环保团体负责人谢和霖表示,过去有沐浴用品、清洁用品含塑料微粒,现在已经禁用。如果环境中到处都有这样的东西,不仅伤害生态,也会通过饮用水、贝类等食物链进入人体。 他认为,台湾当局、民众都应该抑制 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |