牌号简介 About |
---|
Fluon®PTFE颗粒粉末(铸模粉末)用于生产板材、棒材、钢坯和其他一般铸模。填充化合物在另一页中描述。用途:用于G307、G340和G350的通用型铸造;用于G307、G340和G350的自动型铸造;用于G307、G340和G350杆(直径为20毫米)的等静压铸造;用于G307的冲压成型管道;特点:结块(自由流动)非烧结粉末。G307的最佳粉末流量。G340和G350具有良好的表面光洁度和高体积密度,是G350的最高体积密度。 Fluon®PTFE granular powders (moulding powders) are used for the production of sheets, rods, billets and other general mouldings. Filled compounds are described in other page. Applications: general moulding for G307, G340 and G350 automatic moulding for G307, G340 and G350 isostatic moulding for G307, G340 and G350 rod (diameter 20mm) and pipe by ram extrusion for G307 Characteristics: agglomerated (free flowing) unsintered powders. the best powder flow for G307. good surface finish and high bulk density for G340 and G350 the highest bulk density for G350. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表观密度 Apparent density |
0.82 | g/cm³ | JIS K6891 |
收缩率 Shrinkage rate |
2.6 | % | ISO 294-4 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
39.0 | MPa | JIS K6891 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
350 | % | JIS K6891 |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
平均粒径 Average particle size |
350.0 | µm | ASTM D1457 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
Agilyx与埃克森美孚成立合资公司,推进塑料回收
2021-03-01 搜料网资讯: 埃克森美孚已加入Agilyx,成为Cyclyx International的创始成员。Cyclyx International是一家致力于提高塑料废物回收利用率的合资企业。 Cyclyx将收集和预处理塑料废物,以满足一系 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |