公司信息及水印
牌号简介 About |
---|
PBT中粘度30%玻璃纤维增强,流动性好,刚度高,力学和热性能好,尺寸稳定性很高。可供选择:所有颜色,热稳定(H),释放剂(W)。 InnoGreen® BIO-80A is a 80 shore A polyurethane elastomer formulated for hand-batch and vacuum assisted processing. Excellent physical properties can be obtained with a room temperature cure without the utilization of mercury, MOCA, or TDI. InnoGreen® BIO-80A has been approved by the USDA as a bio preferred product. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
Hardener Hardener |
1.02 | g/cm³ | |
固化处理 Curing treatment |
1.12 | g/cm³ | |
基体树脂 Matrix resin |
1.20 | g/cm³ | |
收缩率 Shrinkage rate |
|||
MD MD |
0.10 到 0.50 | % | ASTM D2566 |
生物质含量 Biomass content |
30 | % | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
|||
脱模时间 stripping time |
min | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
粘度 viscosity |
|||
25℃ 25℃ 2 |
Pa·s | ||
25℃ 25℃ 3 |
Pa·s | ||
25℃ 25℃ 4 |
Pa·s | ||
固化时间 Curing time 5 |
hr | ||
胶凝时间 Gelation time |
min | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
ASTM D2240 | ||
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
撕裂强度 tear strength |
kN/m | ASTM D624 |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部
凯柏胶宝推出含38%回收成分的TPE材料,用于气内饰
2022-04-24 凯柏胶宝新推出的TPE产品,根据硬度的不同,其工业后(PIR)回收率高达38%,并被批准用于汽车内饰。该公司的新内饰PIR TPE等级据说可以为汽车市场提供可靠的、可持续的替代原生材料 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |