牌号简介 About |
---|
Polytrope Str 3035EU树脂是一种低光泽、耐候性、高表面硬度的烯烃帽树脂。它能抵抗应力美白,并提供优异的耐用性,防止凹陷、划痕和磨损。它是专门为共挤出工艺设计的,作为一种盖树脂,覆盖在聚变str增强聚烯烃tpo和fr tpo基树脂上。它特别适合热成型应用,因为它通过热成型过程保持其“浮雕纹理和低光泽”。Polytrope Str 3035EU-01天然色易于上色。瓶盖树脂的低光泽和耐用性使其能够匹配或超过ABS、ASA和丙烯酸合金树脂的性能和外观,以实现光滑或纹理化的内部和外部硬面板应用。 POLYTROPE STR 3035EU resin is a low gloss, weatherable, olefin cap resin with high surface hardness. It is resistant to stress whitening and provides exceptional durability against denting, scratches and wear. It is specifically designed for the co-extrusion process as a cap resin over POLYTROPE STR enhanced polyolefin TPO and FR TPO base resins. It is especially suited for thermoformed applications, as it maintains its' embossed texture and low gloss through the thermoforming process. POLYTROPE STR 3035EU-01 Natural is easily colored. The low gloss and durability of the cap resin enables it match or exceed the performance and appearance of ABS, ASA and Acrylic alloy resins for smooth or textured interior and exterior hard panel applications. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density 1 |
1.06 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
0.40 | g/10min | ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服,23℃ Yield, 23 ℃ 2 |
24.0 | MPa | ISO 527-2 |
拉伸应变 Tensile strain 3 |
|||
断裂,233℃ Fracture, 233 ℃ 3 |
410 | % | ISO 527-2 |
弯曲模量 Bending modulus 4 |
|||
弦,23℃ String, 23 ℃ 4 |
1900 | MPa | ISO 178 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
装有测量仪表的落镖冲击 Dart impact equipped with measuring instruments |
|||
-10℃,Total Energy,韧性破坏 -10 ℃, Total Energy, toughness failure |
J | ASTM D3763 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/Bf | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
3.18 mm,All Colors 3.18 mm,All Colors |
UL 94 | ||
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
光泽度 gloss |
|||
60°,3180 µm,热塑,光滑 60 °, 3180 µ m, thermoplastic, smooth |
ISO 2813 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 方法 A |
3 类型 1, 2.0 in/min |
4 类型1A, 0.079 in/min |
【新闻资讯】查看全部
科思创新商业形式 极力推进塑胶工业流程数字化
2019-08-06 数字化是化学及塑胶工业成长的最重要推动因素之一。 科思创 希望通过全面性的策略计划,利用随数字化而产生的机会。 科思创 的计划核心目标在于提供顾客附加价值,并在与顾客共 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |