公司信息及水印
牌号简介 About |
---|
IE-65D是一种坚韧的抗冲击弹性体,适用于室温手工加工。无需使用汞、MOCA或TDI,室温固化即可获得优良的物理性能。 IE-65D is a tough, impact resistant elastomer formulated for room temperature hand-batch processing. Excellent physical properties can be obtained with a room temperature cure without the utilization of mercury, MOCA, or TDI. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
Hardener Hardener |
1.06 | g/cm³ | |
固化处理 Curing treatment |
1.08 | g/cm³ | |
基体树脂 Matrix resin |
1.09 | g/cm³ | |
收缩率 Shrinkage rate |
|||
MD MD |
0.10 到 0.30 | % | ASTM D2566 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
弯曲模量 Bending modulus |
241 | MPa | ASTM D790 |
弯曲强度 bending strength |
MPa | ASTM D790 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
|||
脱模时间 stripping time |
min | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
放热峰值 exothermic peak |
|||
200g mass 200g mass |
℃ | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
粘度 viscosity |
|||
25℃ 25℃ 2 |
Pa·s | ||
25℃ 25℃ 3 |
Pa·s | ||
25℃ 25℃ 4 |
Pa·s | ||
固化时间 Curing time 5 |
hr | ||
胶凝时间 Gelation time |
min | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Hardener |
3 Mixed |
4 Resin |
5 24 hours at 77°F + 16 hours at 180°F |
【新闻资讯】查看全部
裕廊岛完成循环经济转型研究
2021-09-18 搜料网资讯: 近日,新加坡裕廊集团宣布,该公司主导的裕廊岛循环经济研究已完成。园区内51家企业将首次共享能源、水资源和化学废料数据,以优化资源利用,推动新加坡裕廊岛转 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |